Experimental Physics and Industrial Control System
Hi,
> What's the hardware requirements for Newport MM4000/3000 to
> work under motor record? Currently we have mm3000/4000 work with
SPEC/gpib (pci
> card under linux). We'd like to have a VME gpib or serial
> card and put MM4000/3000 in motor record.
>
> My question is: What kind of VME gpib/serial card should I
> get? We have vxWorks 5.3 (BSP mvme-2304, ppc604) and I was able to
built
> epics3.13.9 on it (using the Linux cross compiler from sns).
Under EPICS 3.14.4 it works with mpfSerial. mpfSerial talks to Unix,
Linux and vxWorks serial ports. On vxWorks it works with both the
serial ports on the CPU card, and with the SBS IP-Octal, through Andrew
Johnson's ipac module. I have tested the MM4000 under both vxWorks and
Linux on 3.14.4.
Note that there is currently no support for the SBS IP-488 module under
3.14, because support has been removed from MPF, and support is not yet
provided under Marty Kraimer's asynDriver
(http://www.aps.anl.gov/epics/modules/soft/asynDriver/ )
Mark Rivers
- Navigate by Date:
- Prev:
newport mm4000 motor record hardware(gpib/serial) needs Zhijian Yin
- Next:
Re: Insertion Devices Control and EPICS Nick Rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
newport mm4000 motor record hardware(gpib/serial) needs Zhijian Yin
- Next:
Implementation of alarm handlers by EPICS users Munro Jr, John K.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024