Experimental Physics and Industrial Control System
Hi Dorothea,
> may I ask once again for drivers: Is someone using carrier boards on
> VME-systems running RTEMS together with A/D- and D/A-converter
> Industry Packs?
> We would like to install Industry Packs with 16bit A/D and D/A
> converters respectively with a throuput of >=100kHz. We shortlist the
> IP235 from Acromag, A/Dconverter and the IP-ADC-8401 from Hytec.
I have a driver for the Acromag IP330 A/D, which is 16-bits. I also
have a driver for the Systran DAC-128V D/A, which is 12 bits. Both of
these are Industry Pack devices. The drivers have been extensively
rewritten in the last few weeks to use with the new "asyn" package that
Marty Kraimer mentioned.
The required packages are "IPAC", "asyn", and my drivers. IPAC is
maintained by Andrew Johnson. I don't know if it has been tested under
RTEMS. I doubt if anyone is using my drivers under RTEMS yet, and I
would guess that there will be a small amount of work required to get it
all running on RTEMS.
Mark Rivers
- Replies:
- Re: Industry Pack support under RTEMS available? Kate Feng
- Navigate by Date:
- Prev:
Industry Pack support under RTEMS available? Dorothea Wehler
- Next:
Re: Industry Pack support under RTEMS available? Kate Feng
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Industry Pack support under RTEMS available? Till Straumann
- Next:
Re: Industry Pack support under RTEMS available? Kate Feng
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024