Experimental Physics and Industrial Control System
I use "dbLoad" files such as this one:
#----------------------------------------------------------------------
# HPS937A - LOAD RECORD INSTANCES
#----------------------------------------------------------------------
# Serial Port Number = ${SPN}
# Serial Configuration = 9600 8N1
#----------------------------------------------------------------------
dbLoadRecords("${DB_DIR}/HPS937A.db","deviceName=${IOCNAME}:HPS937A:${SPN}:${PAD},
serialPortNumber=${SPN},primaryAddress=${PAD},
baudRate=${BR},numberOfDataBits=8,parity=0,numberOfStopBits=1");
those can be considered as template for intanciation.
In the stcmd file ( iocsh script ), I source those template files with a
command as follow:
< /DBL_DIR/HPS937A.dbl
Now, before I source this file, I need to epicsSetEnv all the variables
such as ${SPN} and ${PAD} and ${IOCNAME}. ( or they need to be defined
in the linux shell )
Now, I would like to include in my dbl files a command that says:
If this variable is not set, then set it to this value.
This would enable me to just set the vars that are meaningful.
For example, baudRate could default to 9600. But if I really want to
change it I can do so with epicsSetEnv(BR,19200).
--
E
- Replies:
- Re: if-then-else in iocsh Eric Norum
- Re: if-then-else in iocsh Andrew Johnson
- References:
- if-then-else in iocsh Emmanuel Mayssat
- Re: if-then-else in iocsh Andrew Johnson
- Re: if-then-else in iocsh Maren Purves
- Navigate by Date:
- Prev:
Re: if-then-else in iocsh Maren Purves
- Next:
Re: if-then-else in iocsh Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: if-then-else in iocsh Maren Purves
- Next:
Re: if-then-else in iocsh Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024