Experimental Physics and Industrial Control System
Our requirements have changed slightly :-) Although Ernie Williams
sent a complete package of source code for the ICS-145 digitizer, our
EE has decided that the ICS-130 more closely meets our needs. Does
anyone have EPICS source code for it? Of course, any experience from
the field is most welcome.
The ICS-130 and -145 are very similar, with only slight differences
in register layout, however, before converting the -145 to -130, I
thought I would see if someone has already done it. We will be
acquiring the vxWorks source code from ICS, so that should cover the
low-level, non-EPICS routines.
We are also purchasing the companion ICS-121 signal conditioning
board. Any support for or experience with it?
Thanks.
--
______________________________________________________________
Stephen A. Lewis |
Linac Coherent Light Source | [email protected]
Lawrence Livermore National Laboratory | Tel: 925.423.4751
7000 East Ave, L-210 | FAX: 925.423.1488
Livermore, CA 94550 |
- Navigate by Date:
- Prev:
Re: RE: Channel archiver r_ani
- Next:
Alarm trigger for persistent values? Bernhard Lopez
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Epics 3.14.8.2 for Windows still has problems Liyu, Andrei
- Next:
Alarm trigger for persistent values? Bernhard Lopez
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024