EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Re: EPICS Extensions
From: Andrew Johnson <[email protected]>
To: "Szalata, Zenon M." <[email protected]>
Cc: EPICS tech-talk <[email protected]>
Date: Wed, 05 Sep 2007 14:52:05 -0500
Szalata, Zenon M. wrote: 
I also tried Configure Files (Old method) with similar unsatisfactory
results.  Please, advise.

You need MEDM version 3.1.2.1 to use the R3.14 build files; MEDM 3.1.1 needs the old extensionsConfig area instead; I would definitely recommend getting the newer version of MEDM rather than trying to set up the older extensions area.

- Andrew
--
When a distinguished but elderly scientist states that something is
possible, he is almost certainly right.  When he states that something
is impossible, he is very probably wrong.  -- Arthur C. Clarke
Replies:
RE: EPICS Extensions Szalata, Zenon M.
References:
EPICS Extensions Szalata, Zenon M.
Navigate by Date:
Prev: EPICS Extensions Szalata, Zenon M.
Next: RE: EPICS Extensions Szalata, Zenon M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: EPICS Extensions Szalata, Zenon M.
Next: RE: EPICS Extensions Szalata, Zenon M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <2007>  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025