1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 <2007> 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Gateway questions |
From: | Ralph Lange <[email protected]> |
To: | "Leicester, PJ \(Pete\)" <[email protected]> |
Cc: | [email protected] |
Date: | Tue, 11 Dec 2007 17:25:56 +0100 |
A have a few gateway question:-
1) We have just configured a couple of new gateways. When we first ran them they repeatedly wrote the following error message to the gateway log file every 15 seconds even though the gateway appeared to be working OK.
../../../../src/cas/io/bsdSocket/casDGIntfIO.cc: CA beacon socket disconnect error was "Network is unreachable"
Dec 11 12:02:34 !!! Errlog message received (message is above)
After some experimentation we found we could get rid of the error by adding a 'default' route to the routing tables on the host machine. We actually set up a default route to a non-existent IP address.
Is this a problem with the gateway software or have we missed something in our gateway configuration? (We are running gateway version 2.0.0.0)
2) I notice that a '-archive' option has appeared in the latest gateway. We currently run a separate additional gateway exclusively for our archiver with the '-mask l' option to ensure we don't archive anything based on MDEL (a parallel gateway serves PV's to edm and other clients). What is the difference between '-archive' and '-mask l'? Should I now revert to having a single 'gateway -archive' for both the archiver and other (edm) clients? Would I gain/lose anything?
3) Where do I find a summary of the changes between gateway version 2.0.0.0 and the two later versions 2.0.2.0 and 2.0.2.1?
Hope this helps, Ralph