Experimental Physics and Industrial Control System
Hi all,
I want to use genSub record but I don't know how to make it available, I
use EPICS 3.14.8.
My starting point is the example application obtained with :
>makeBaseApp.pl -t exampleApp myGenSubApp
>makeBaseApp.pl -i -t exampleBoot myGenSubApp
Here is What I did:
- In the <top>/configure/RELEASE file I have added the location of the
gensub module (GENSUB=$(EPICS_BASE)/../modules/soft/gensub)
- then I run the make command in the <top> directory
=> When I inspect the application tree there is nothing related to the
genSub, the genSub record is not available in VDCT.
As a first step I would like to do what is done in the example
application with the sub record but with a genSub record.
Can someone explain me the procedure to have genSub available ?
Regards.
- Replies:
- Re: How to introduce usage of genSub ? Tim Mooney
- Navigate by Date:
- Prev:
DMA Example Szalata, Zenon M.
- Next:
Re: array calc / inverse subarray survey? Luedeke Andreas
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: DMA Example Andrew Johnson
- Next:
Re: How to introduce usage of genSub ? Tim Mooney
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024