| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Firewall configuration? |
| From: | "Allison, Stephanie" <[email protected]> |
| To: | "Chris Jacobsen" <[email protected]>, <[email protected]> |
| Date: | Thu, 5 Feb 2009 13:51:08 -0800 |
Hi Chris, > Hi - I'd like to have a firewall configured on my linux system but > when I turn it on then I get a timeout when accessing EPICS variables > on a remote system. I thought it would be sufficient to enable TCP > and UDP access on ports 5064 and 5065, since I'm running with a > "standard" EPICS build on the latest release. Can anyone > suggest what else I need to set in a firewall configuration to allow EPICS to work? This is fine for destination ports but we also enable 1 to 65535 on source ports for the CA TCP connections. Stephanie Allison