1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Winsock error10004 |
From: | Mark Clift <[email protected]> |
To: | "[email protected] ([email protected])" <[email protected]> |
Date: | Fri, 24 Apr 2009 20:54:36 +1000 |
Hi all,
I'm building a basic IOC under windows XP by doing the following:
makeBaseApp.pl -t ioc <name>
makeBaseApp.pl -i -t ioc <name>
Then I build the ioc, and run it without databases. The IOC runs without any initialisation errors. The EPICS version is 3.14.10, and the compiler is Visual C++ Express 2005. The EPICS build system is set to build
statically.
Upon exit I get the following errors
CAS: Client accept error was "WINSOCK Error 10004"
CAS: UDP recv error (errno=WINSOCK Error 10004) ..\online_notify.c: CA beacon routing (connect to "10.123.255.255:5065") error w as "WINSOCK Error 10093"
or CA cast server: Unable to fetch N characters pending CAS: Client accept error was "WINSOCK Error 10004"
CAS: UDP recv error (errno=WINSOCK Error 10004) CA cast server: Unable to fetch N characters pending Strangely, the ioc's that build under areaDetector 1-4 using win32-x86, do not have this error on exit and run fine.
Has anybody had this error ? Why is the IOC expecting a response to a broadcast like this ? Does anyone know how to fix ?
Thanks heaps,
Mark Clift.
|