EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: RE: MOXA terminal server
From: <emma.shepherd@diamond.ac.uk>
To: <hxu@bnl.gov>, <tech-talk@aps.anl.gov>
Date: Tue, 11 Jan 2011 12:07:14 +0000
Hi Huijuan,

I spotted this as well, but unfortunately it didn't seem to work - the
serial settings didn't appear to actually change until I rebooted the
whole device.  Have you had success with it?

Thanks,
Emma

> -----Original Message-----
> From: Xu, Huijuan [mailto:hxu@bnl.gov]
> Sent: 10 January 2011 18:33
> To: Shepherd, Emma (DLSLtd,RAL,DIA); tech-talk@aps.anl.gov
> Subject: RE: MOXA terminal server
> 
> Hello Emma,
> Moxa allows single port restart over the web interface. There's
> 'Restart
> Ports' option under 'Restart'. When you submit the new settings for
the
> serial port you can simply save the settings and just restart the port
> you changed.
> 
> Regards,
> Huijuan
> 
> -----Original Message-----
> From: tech-talk-bounces@aps.anl.gov
> [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of
> emma.shepherd@diamond.ac.uk
> Sent: Monday, January 10, 2011 4:22 AM
> To: wenorum@lbl.gov; tech-talk@aps.anl.gov
> Subject: RE: MOXA terminal server
> 
> Hi Eric,
> 
> Thanks a lot for that, it sounds very useful.  I'd be happy to help
> out.
> 
> Cheers,
> Emma
> 
> > -----Original Message-----
> > From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-
> > bounces@aps.anl.gov] On Behalf Of Eric Norum
> > Sent: 07 January 2011 16:50
> > To: EPICS Tech Talk
> > Subject: Re: MOXA terminal server
> >
> > On Jan 5, 2011, at 9:37 AM, Eric Norum wrote:
> >
> > > It would be great if someone were to write an ASYN interposed
layer
> > above the IP Port driver to allow settings  of remote serial ports
to
> > be controlled (via RFC 2217 commands) in the same manner as local
> > serial ports (i.e. through an ASYN record or through IOC shell
> > commands).
> > > Anyone interested?
> >
> >
> > I didn't get a lot of volunteers for this, but I did find out that
> > quite a few terminal servers support RFC 2217.   Given that I've
> > started working on an asynOctet interposed layer to support this.
> > I'll be looking for testers sometime next week -- hopefully.   For
> now
> > I don't plan to support any more than just setting rate, # stop
bits,
> #
> > data bits, parity and RTS/CTS flow control.
> >
> > --
> > Eric Norum
> > wenorum@lbl.gov
> >
> 
> 
> --
> This e-mail and any attachments may contain confidential, copyright
and
> or privileged material, and are for the use of the intended addressee
> only. If you are not the intended addressee or an authorised recipient
> of the addressee please notify us of receipt by returning the e-mail
> and
> do not use, copy, retain, distribute or disclose the information in or
> attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual
> and not necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any
> attachments are free from viruses and we cannot accept liability for
> any
> damage which you may sustain as a result of software viruses which may
> be transmitted in or with the message.
> Diamond Light Source Limited (company no. 4375679). Registered in
> England and Wales with its registered office at Diamond House, Harwell
> Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
> Kingdom
> 
> 
> 
> 


-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
 





Replies:
RE: MOXA terminal server Xu, Huijuan
References:
MOXA terminal server emma.shepherd
Re: MOXA terminal server Dirk Zimoch
RE: MOXA terminal server emma.shepherd
Re: MOXA terminal server Eric Norum
Re: MOXA terminal server Eric Norum
RE: MOXA terminal server emma.shepherd
RE: MOXA terminal server Xu, Huijuan

Navigate by Date:
Prev: RE: Writing mbbo/mbbi text labels using asynPortDriver/areaDetector Mark Rivers
Next: Re: PV Mapping Using Java Annotations J. Lewis Muir
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: RE: MOXA terminal server Xu, Huijuan
Next: RE: MOXA terminal server Xu, Huijuan
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020