Experimental Physics and Industrial Control System

This issue is now somewhat moot since I've just finished adding ASYN support for RFC2217 servers. This allows port parameters (speed, parity, etc.) to be set using an asynRecord or asynSetOption commands just as for local serial ports.   The changes have been committed and a new ASYN release containing the changes should be coming soon.

I'd like to send a big "thank you" to Emma Shepherd at Diamond for helping with testing and debugging the code.


On Jan 13, 2011, at 10:00 AM, Xu, Huijuan wrote:

> Hello Emma,
> Sorry to find out that the single port reboot function only works with
> CN 2650. I tested with a CN6650 with no fortune. The Moxa representative
> has notified this problem to a local product manager who may be able to
> get the support to reset the individual port on the NPort 6650.
> 
> Regards,
> Huijuan  
> 

-- 
Eric Norum
[email protected]

References:

MOXA terminal server emma.shepherd

Re: MOXA terminal server Dirk Zimoch

RE: MOXA terminal server emma.shepherd

Re: MOXA terminal server Eric Norum

Re: MOXA terminal server Eric Norum

RE: MOXA terminal server emma.shepherd

RE: MOXA terminal server Xu, Huijuan

RE: MOXA terminal server emma.shepherd

RE: MOXA terminal server Xu, Huijuan

Navigate by Date:

Prev: Re: large arrays native element count wrong with Channel Access in EPICS 3.14.12 Andrew Johnson

Next: Re: Access to records from subroutines during iocInit Rod Nussbaumer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: MOXA terminal server Xu, Huijuan

Next: Re: MOXA terminal server Dirk Zimoch

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <2011>  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024