| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: stream without asynPort |
| From: | "Szalata, Zenon M." <[email protected]> |
| To: | Rod Nussbaumer <[email protected]>, Mark Rivers <[email protected]> |
| Cc: | EPICS tech-talk <[email protected]> |
| Date: | Thu, 17 Feb 2011 14:51:51 -0800 |
Hi,
Attached are EDM equivalents of the MEDM screens for asyn record. They are a result of adl2edl conversion.
Zen
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Rod Nussbaumer
> Sent: Thursday, February 17, 2011 2:27 PM
> To: Mark Rivers
> Cc: EPICS tech-talk
> Subject: Re: stream without asynPort
>
> Mark Rivers wrote:
> >> When these are set to produce verbose console output, it can be
> > difficult to turn them off by
> >> typing. Hooking them to EPICS records like multibit binaries could
> > make it really
> >> convenient.
> >
> > That's already possible. You just connect an asyn record to that asyn
> > port. The asyn record has a nice medm screen which lets you turn the
> > mask bits on and off. Moreover, a single asyn record can be switched
> > between ports (and between asyn "addr" addresses) so you don't
> > necessarily need one asyn record for each port, a single asyn record per
> > IOC would be sufficient.
> >
> > Mark
>
> Okay, I will have to try that, in the case of setting asynTrace masks.
> However, in the more general case, I think being able to use
> streamDevice's exec functions would still benefit from being able to
> access the attached PV.
>
> Has anyone done a conversion of the MEDM screens to EDM screens related
> to the asyn record? I've often wanted to play with the asyn record, but
> it always looked like the secret to its use was somewhat embedded in the
> screens, and we only use EDM here. I guess I'll have to see if there is
> a Capfast symbol for the asyn record, too...
>
> Thanks.
>
> --- rod.
Attachment:
asynGPIBSetup.edl
Description: asynGPIBSetup.edl
Attachment:
asynOctet.edl
Description: asynOctet.edl
Attachment:
asynRecord.edl
Description: asynRecord.edl
Attachment:
asynRegister.edl
Description: asynRegister.edl
Attachment:
asynSerialPortSetup.edl
Description: asynSerialPortSetup.edl
Attachment:
asynSocketSetup.edl
Description: asynSocketSetup.edl
Attachment:
ipSNCServer.edl
Description: ipSNCServer.edl