Hi all,
So continuing to learn my way through all of this, I'm encountering a
problem with using the motor record to control a MAXv. The basic
setup: an MVME5500 running RTEMS 4.10 (with the bspExt code for the
mvme5500), and I've tried both 3.14.11 and 3.14.12 versions of EPICS
using version 6-5-2 of the motor record. Building and deploying the
NoAsyn example app.
Here is my startup output:
-----------------------------------------
Welcome to rtems-4.10.0(PowerPC/Generic (classic FPU)/mvme5500) on
MVME5500-0163
-----------------------------------------
Now BSP_mem_size = 0x1FE00000
Marvell GT64260B (Discovery I) hostbridge detected at bus0 slot0
BSP unlisted vendor, Bus0 Slot10 DeviceID 0x263388
TUNDRA PCI-VME bridge detected at bus1 slot0
Marvell GT64260B (Discovery I) hostbridge detected at bus8 slot0
BSP unlisted vendor, Bus8 Slot10 DeviceID 0x10088086
Universe II PCI-VME bridge detected at 0x82000000, IRQ 12
Universe Master Ports:
Port VME-Addr Size PCI-Adrs Mode:
0: 0x20000000 0x0E000000 0x90000000 A32, D64 [MBLT], Dat, Sup
1: 0x00000000 0x00FF0000 0x9F000000 A24, D64 [MBLT], Dat, Sup
2: 0x00000000 0x00010000 0x9FFF0000 A16, D64, Dat, Sup
Universe Slave Ports:
Port VME-Addr Size PCI-Adrs Mode:
0: 0x90000000 0x1FE00000 0x00000000 A32, Pgm, Dat, Sup, Usr, PWEN,
PREN
Overriding main IRQ line PCI info with 76
Registering /dev/console as minor 0 (==/dev/ttyS0)
***** Initializing network *****
Startup.
Attaching MVME5500 1GHz NIC1
RTEMS-mvme5500 BSP Copyright (c) 2004,2005,2008, Brookhaven National
Lab., Shuchen Kate Feng
***** Initializing NFS *****
Mount 10.40.30.108:/tftpboot/epics on /epics
RTEMS-RPCIOD $Release$, Till Straumann, Stanford/SLAC/SSRL 2002, See
LICENSE file for licensing info.
RTEMS-NFS $Release$, Till Straumann, Stanford/SLAC/SSRL 2002, See
LICENSE file for licensing info.
***** Starting EPICS application *****
#Startup script for loading and configuring an OMS MAXv controller.
< /epics/mvme5500/envPaths
epicsEnvSet("ARCH","RTEMS-mvme5500")
epicsEnvSet("IOC","iocNoAsyn")
dbLoadDatabase("/epics/mvme5500/dbd/motorRecord.dbd")
dbLoadDatabase("/epics/mvme5500/dbd/devOms.dbd")
dbLoadDatabase("/epics/mvme5500/dbd/NoAsyn.dbd")
NoAsyn_registerRecordDeviceDriver(pdbbase)
dbLoadTemplate("/epics/mvme5500/motor.substitutions")
MAXvSetup(1, 16, 0xF000, 190, 5, 10)
MAXvConfig(0, "AX LL PSO; AY LL PSO; AZ LL PSO; AT LL PSO; AU LH PSO;
AV LH PSO; AR LH PSO; AS LH PSO;")
iocInit
Starting iocInit
############################################################################
## EPICS R3.14.12 $Date: Wed 2010-11-24 14:50:38 -0600$
## EPICS Base built Feb 25 2011
############################################################################
libbspExt - Warning: it seems that MCP support is not available on
your CPU
or not implemented by your board. Address probing
must
be performed in polling mode with interrupts
disabled
Warning: bspExtMemProbe kills real-time performance.
Your BSP does or can not use MCP exceptions - we
must probe with INTERRUPTS DISABLED !!!
use only during driver initialization
clear the 'bspExtVerbosity' variable to silence this warning
Warning: bspExtMemProbe kills real-time performance.
Your BSP does or can not use MCP exceptions - we
must probe with INTERRUPTS DISABLED !!!
use only during driver initialization
clear the 'bspExtVerbosity' variable to silence this warning
Warning: bspExtMemProbe kills real-time performance.
Your BSP does or can not use MCP exceptions - we
must probe with INTERRUPTS DISABLED !!!
use only during driver initialization
clear the 'bspExtVerbosity' variable to silence this warning
Illegal field value PV: IOC:m1 motor_init_record_com(): card does not
exist!