| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: EPICS BOY saying EPICS PV is disconnected even though to can be read through the terminal with no issues |
| From: | "Kasemir, Kay" <[email protected]> |
| To: | Adam Gluck <[email protected]>, "[email protected]" <[email protected]> |
| Date: | Thu, 18 Aug 2011 13:14:22 -0400 |
Hi: On 8/18/11 12:28 , "Adam Gluck" <[email protected]> wrote: > Hello All, > > I have set up EPICS on a Scientific Linux 5.5 computer with the > 2.6.18-238.9.1.el5 kernel. I am using CSS to try and read the PV back in > BOY. When I type the PV in the field then run the OPI it will display a > disconnected message and no values are read. If I do the call from the > terminal I can read the value back with no issue. I have also tried this > on a Windows XP machine with the same results. Do you know what steps I > could take for further troubleshooting to find out why this is showing > disconnected? Or what other information would be helpful is > troubleshooting the problem. Thanks for the help. > > Cheers, > > Adam Gluck | Applications Engineer | National Instruments >