EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: [db] simple command ?
From: Pavel Masloff <pavel.masloff@gmail.com>
To: EPICS Tech Talk <tech-talk@aps.anl.gov>
Date: Wed, 4 Apr 2012 17:42:40 +0400
Hello tech-talkers,


I would like to implement a simple command record, the idea of which is to switch its VAL to 1 and then back to 0. Let's assume we have got the following record:

record (bo,"cmd:valve_trigger")
{
    field(PINI, "YES")
    field(DTYP, "S7plc")
    field(OUT, "@plc/0 T=UINT8 B=0")
    field(SCAN, "I/O Intr")
    field(ONAM, "ONE")
    field(ZNAM, "ZERO")
}

Is there any straightforward solution?
Thank you.


--
Best regards,


Pavel Maslov, MS
Controls Engineer at Pulsed power Lab
Efremov Institute for Electro-Physical Apparatus
St. Petersburg, Russia

Mobile: +7 (951) 672 22 19
Phone: +7 (812) 461 01 01


Replies:
Re: [db] simple command ? Hartman, Steven M.
Re: [db] simple command ? Tim Mooney

Navigate by Date:
Prev: Re: Inspect Samples of CSS shows inconsistent SEVR Burkhard Kolb
Next: Re: Inspect Samples of CSS shows inconsistent SEVR Kasemir, Kay
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: DataBrowser "Optimized" data Re: Inspect Samples of CSS shows inconsistent SEVR Kasemir, Kay
Next: Re: [db] simple command ? Hartman, Steven M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020