EPICS epicsTimeGetEvent failed

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Hello all.

I tried to run the mrfioc2 EPICS module for the MRF's VME-EVG-230&VME-EVR-230(not VME-EVR-230RF).

Now, I tried to test In accordance with Section 6.1(EVG and EVR Checkout) of "EVR Usage Guide"

The settings related to the "Reset EVR heartbeat timeout counter", there is no problem.

But there is a problem in the settings related to the "Reset timestamp counter".

When EVG generate the Event Code 125, then EVR print the error-message.

recGblGetTimeStamp: epicsTimeGetEvent failed, TST{evr:1}Time-I.TSE = 125

I don’t know the meaning of this message. Please help me.

Thank you.

Best Regards.

GeonYeong

------------------------------------------------------------------------------------------

VxWorks System Boot

CPU: Motorola MVME6100-0173 - MPC 7457

Version: VxWorks 6.9

BSP version: 6.9/0

Creation date: Apr 16 2013, 16:55:52

Press any key to stop auto-boot...

auto-booting...

boot device : geisc

unit number : 0

processor number : 0

host name : gymun

file name : /home/work/image/vxWorks

inet on ethernet (e) : 141.223.48.52:ffffff00

host inet (h) : 141.223.48.51

gateway inet (g) : 141.223.48.99

user (u) : work

ftp password (pw) : work

flags (f) : 0x0

target name (tn) : evg01

startup script (s) : /home/work/st.vxWorks

Loading... 2348400

Starting at 0x100000...

Loading symbol table from gymun:/home/work/image/vxWorks.sym ...done

VxWorks

CPU: Motorola MVME6100-0173 - MPC 7457

Runtime Name: VxWorks

Runtime Version: 6.9

BSP version: 6.9/0

Created: Apr 16 2013, 16:56:21

ED&R Policy Mode: Deployed

WDB Comm Type: WDB_COMM_END

WDB: Ready.

Executing startup script '/home/work/st.vxWorks'...

#================

tyBackspaceSet(0177)

value = 127 = 0x7f

#ld < mrf.munch

ld < mrfTest.munch

value = 72204304 = 0x44dc010

# env setting

epicsEnvSet("ENGINEER","Geon-Yeong Mun")

value = 0 = 0x0

epicsEnvSet("LOCATION","testLab")

value = 0 = 0x0

epicsEnvSet("EPICS_CA_MAX_ARRAY_BYTES","1000000")

value = 0 = 0x0

epicsEnvSet("EPICS_TS_NTP_INET","141.223.48.51")

value = 0 = 0x0

#dbLoadDatabase("dbd/mrf.dbd",0,0)

#mrf_registerRecordDeviceDriver(pdbbase)

dbLoadDatabase("dbd/mrfTest.dbd",0,0)

value = 0 = 0x0

mrfTest_registerRecordDeviceDriver(pdbbase)

value = 0 = 0x0

# EVG(A24)

#mrmEvgSetupVME("EVG1",2,0x00050000,4,0xc0)

mrmEvgSetupVME("EVG1",2,0x00000000,4,0xc0)

##### Setting up MRF EVG in VME Slot 2 #####

Found Vendor: Can't register 's00000ystem' command eb2-- no command int

Board: erpreter ava454700e6ilable.

Revision: 00000000

FPGA version: 22000005

FPGAVersion 0x22000005

IRQ Level: 4

IRQ Vector: 192

csrCpuAddr : 0x8f0f0000

regCpuAddr : 0x90000000

value = 0 = 0x0

# EVR(A24)

#mrmEvrSetupVME("EVR1",5,0x00100000,3,0x26)

#mrmEvrSetupVME("EVR1",5,0x00200000,4,0x24)

#mrmEvrSetupVME("EVR1",5,0x08000000,3,0x26)

mrmEvrSetupVME("EVR1",5,0x00010000,3,0x26)

Setting up EVR in VME Slot 5

Found vendor: 00000eb2 board: 455246e6 rev.: 00000000

EVR check. EVR-230 'EVR1' slot 5

FPGA version... 0006

Found SFP Strangeness ffffffff

FWVersion 0x1VME64 2000006

Out FP:Found version 6

7 FPUNIV:4 RB:16 IFP:2

Using IRQ EVR FIFO t3ask start

:38

value = 0 = 0x0

# EVG db

dbLoadRecords("db/vme-evg230.db", "SYS=TST, D=evg:1, EVG=EVG1")

value = 0 = 0x0

# BNL specific timing sequence constructor

#dbLoadRecords("db/nsls2-inj-seqs.db","LN=LN-TS, BR=BR-TS, INJ=TST, EVG=evg:1, SEQ=SoftSeq:0")

# EVR

dbLoadRecords("db/evr-vmerf-230.db","SYS=TST, D=evr:1, EVR=EVR1")

value = 0 = 0x0

#dbLoadRecords("db/iocAdminRTEMS.db", "IOC=mrftest")

dbLoadRecords("db/iocAdminVxWorks.db", "IOC=mrftest")

value = 0 = 0x0

# Auto save/restore

#save_restoreDebug(2)

#dbLoadRecords("db/save_restoreStatus.db", "P=mrftest:")

#save_restoreSet_status_prefix("mrftest:")

#set_savefile_path("{mnt}/as","/save")

#set_requestfile_path("{mnt}/as","/req")

#set_savefile_path("/autosave","/save")

#set_requestfile_path("/autosave","/req")

#set_pass0_restoreFile("mrf_settings.sav")

#set_pass0_restoreFile("mrf_values.sav")

#set_pass1_restoreFile("mrf_values.sav")

#set_pass1_restoreFile("mrf_waveforms.sav")

iocInit()

Starting iocInit

############################################################################

## EPICS R3.14.12.3 $Date: Mon 2012-12-17 14:11:47 -0600$

## EPICS Base built Apr 11 2013

############################################################################

Set EVR clock 124916000.000000

iocRun: All initialization complete

value = 0 = 0x0

#makeAutosaveFileFromDbInfo("/autosave/req/mrf_settings.req", "autosaveFields_pass0")

#makeAutosaveFileFromDbInfo("/autosave/req/mrf_values.req", "autosaveFields")

#makeAutosaveFileFromDbInfo("/autosave/req/mrf_waveforms.req", "autosaveFields_pass1")

#create_monitor_set("mrf_settings.req",10,"")

#create_monitor_set("mrf_values.req",10,"")

#create_monitor_set("mrf_waveforms.req",30,"")

Done executing startup script '/home/work/st.vxWorks'.

-> Set EVR clock 119000000.000000

recGblGetTimeStamp: epicsTimeGetEvent failed, TST{evr:1}Time-I.TSE = 125

-> generalTimeReport(2)

Backwards time errors prevented 4 times.

Current Time Providers:

"EVR", priority = 50

Current Time not available

"NTP", priority = 100

Current Time is $“.

"OS Clock", priority = 999

Current Time is $“.

Event Time Providers:

"EVR", priority = 50

value = 0 = 0x0

Subject:	epicsTimeGetEvent failed
From:	"Geon-Yeong Mun" <[email protected]>
To:	<[email protected]>
Date:	Fri, 10 May 2013 16:25:35 +0900

Experimental Physics and Industrial Control System