1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Relative time in XY graph |
From: | Himanshu Tyagi <[email protected]> |
To: | "Fabian S." <[email protected]>, [email protected] |
Date: | Wed, 15 May 2013 14:28:23 +0530 |
at least in EDM there is a TriggerPV somewhere in the grap settings that
should do what you describe. Down side is that your graph gets updated
even if the value hasn't changed.
The trigger pv could be a calc which gets updated every 1 second and
counts up to 5 where an additonal condition stops the counter/trigger-value.
On 05/14/2013 08:56 AM, Himanshu Tyagi wrote:
> Hi,
>
> I m new to epics framework. We have a requirement for getting the relative
> time in XY graph so that the all the signals start and stop at same time
> value.
> Is there any way we can control the time values in XY graph and
> have relative scale ,i.e. time should start from t=0 to t=5 sec and then
> graph should stop.
>
> Regards,
> Himanshu
>
P Please consider the environment before printing this e-mail