1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Please help us with some error when running a softGlue application! |
From: | 周永年 <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Thu, 4 Jul 2013 02:19:14 +0000 |
Hi all!
I'm yongnian from SSRF(Shanghai Synchrotron Radiation Facility).To use softGlue,we bought 2 sets of Acromag's products, including AVME9670 + IP-EP201 + TRANS-200 + 5028-378 Termination
Panel.
We tried to compiled a softGlue application in EPICS according to the guide http://www.aps.anl.gov/bcda/synApps/softGlue/softGlueDoc.html.
According to the guide,we finished ipac,asyn,busy and softGlue modules.
When we loading the application in MVME5500 and vxWorks, it had an error such as:
initIP_EP200_FPGA(0,0,"$(SOFTGLUE/softGlueApp/Db/SoftGlue_2_2_1ID_Vgate_0_1.hex)
initIP_EP200_FPGA:bad carrier or slot
value = -1 = 0xffffffff
It seemed that the IP-carrier number or the IP-slot number is wrong. In our case,we use only one carrier board AVME9670 with only one IP card IP-EP201.Is our parameters right?
Thank you very much for giving us guide!
yours yongnian
|