EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Please help us with some error when running a softGlue application!
From: Mark Rivers <[email protected]>
To: 周永年 <[email protected]>, "[email protected]" <[email protected]>
Date: Thu, 4 Jul 2013 06:40:58 +0000
Please send the output of



ipacReport(2)



That will show if you have a correctly initialized IP carrier card.



Mark



________________________________
From: [email protected] [[email protected]] on behalf of 周永年 [[email protected]]
Sent: Wednesday, July 03, 2013 9:19 PM
To: [email protected]
Subject: Please help us with some error when running a softGlue application!

Hi all!

I'm yongnian from SSRF(Shanghai Synchrotron Radiation Facility).To use softGlue,we bought 2 sets of Acromag's products, including AVME9670 + IP-EP201 + TRANS-200 + 5028-378 Termination Panel.

We tried to compiled a softGlue application in EPICS according to the guide http://www.aps.anl.gov/bcda/synApps/softGlue/softGlueDoc.html.

According to the guide,we finished ipac,asyn,busy and softGlue modules.

When we loading the application in MVME5500 and vxWorks, it had an error such as:

initIP_EP200_FPGA(0,0,"$(SOFTGLUE/softGlueApp/Db/SoftGlue_2_2_1ID_Vgate_0_1.hex)
initIP_EP200_FPGA:bad carrier or slot
value = -1 = 0xffffffff

It seemed that the IP-carrier number or the IP-slot number is wrong. In our case,we use only one carrier board AVME9670 with only one IP card IP-EP201.Is our parameters right?

Thank you very much for giving us guide!

yours yongnian


References:
Please help us with some error when running a softGlue application! 周永年

Navigate by Date:
Prev: MsAceess Database and CSS connectivity Ganesh Jangir
Next: Re: caget can't connect to soft ioc on host with multiple NICs Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Please help us with some error when running a softGlue application! 周永年
Next: MsAceess Database and CSS connectivity Ganesh Jangir
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024