I'm yongnian from SSRF(Shanghai Synchrotron Radiation Facility).To use softGlue,we bought 2 sets of Acromag's products, including AVME9670 + IP-EP201 + TRANS-200 + 5028-378 Termination
According to the guide,we finished ipac,asyn,busy and softGlue modules.
When we loading the application in MVME5500 and vxWorks, it had an error such as:
initIP_EP200_FPGA:bad carrier or slot
value = -1 = 0xffffffff
It seemed that the IP-carrier number or the IP-slot number is wrong. In our case,we use only one carrier board AVME9670 with only one IP card IP-EP201.Is our parameters right?
Thank you very much for giving us guide!