1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Unable to build support modules on Windows, with base 3.15.2 |
From: | "Heesterman, Peter J" <[email protected]> |
To: | "'Mark Rivers'" <[email protected]>, "EPICS Tech-Talk ([email protected])" <[email protected]> |
Date: | Tue, 15 Sep 2015 17:13:21 +0000 |
Hi Mark, Thank you for having a look at this. I’m still at a loss, it’s interesting that it works for you. I’m using ActivePerl v5.16.3. As it happens, I have both the 32 and 64-bit versions installed (same version). This is unnecessary for the EPICS build - I can choose either by altering the PATH to the Perl tools. I note you are using the 64-bit version – I set my usage to match yours, but that didn’t make a difference. Cheers, Peter. From: Mark Rivers [mailto:[email protected]]
Hi Peter, I just tested building base 3.15.2 on windows-x64, and then building the support modules (seq, asyn, autosave, etc.). It worked fine for me, I did not get the errors you did. What version of perl are you using?
I am using ActivePerl 5.14.2. ********************************* C:\EPICS>perl --version This is perl 5, version 14, subversion 2 (v5.14.2) built for MSWin32-x64-multi-thread (with 1 registered patch, see perl -V for more detail) Copyright 1987-2011, Larry Wall Binary build 1402 [295342] provided by ActiveState
http://www.ActiveState.com Built Oct 7 2011 15:19:36 ********************************* Mark From:
[email protected] [mailto:[email protected]]
On Behalf Of Heesterman, Peter J Hi, I just downloaded EPICS base 3.15.2, superseding previous 3.15.1. I am experiencing a problem building any of the support modules, while using the make file build. (There is no problem building base 3.15.2 itself, however.) I’ve built all the same code successfully on Linux, while using 3.15.2. See attached, these are examples when trying to build Asyn or Seq, but this applies to all modules I’ve looked at, and to different build configurations I’ve attempted. It all built OK when using 3.15.1. What could I be missing? Thanks, Peter. |
This is perl 5, version 16, subversion 3 (v5.16.3) built for MSWin32-x64-multi-thread (with 1 registered patch, see perl -V for more detail) Copyright 1987-2012, Larry Wall Binary build 1603 [296746] provided by ActiveState http://www.ActiveState.com Built Mar 13 2013 13:31:10 Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page.
This is perl 5, version 16, subversion 3 (v5.16.3) built for MSWin32-x86-multi-thread (with 1 registered patch, see perl -V for more detail) Copyright 1987-2012, Larry Wall Binary build 1603 [296746] provided by ActiveState http://www.ActiveState.com Built Mar 13 2013 11:29:21 Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page.