EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Unable to build support modules on Windows, with base 3.15.2
From: "J. Lewis Muir" <[email protected]>
To: "Mark S. Engbretson" <[email protected]>, [email protected]
Date: Wed, 16 Sep 2015 15:46:05 -0500
On 9/16/15 2:45 PM, Mark S. Engbretson wrote:
> You know - this sort of issue happens all the time on windows builds
> for EPICS, synapps, and area detector and I am always amazed that
> there isn't a location where people have specifically stated the exact
> version of what and where they obtained EVERYTHING, and that it is
> *known* to work.

Hi, Mark.

Andrew has such a web page for EPICS Base at:

http://www.aps.anl.gov/epics/base/win32.php

> I've never understood the point of making everyone build everything
> from first principles when the target your going for is always moving
> or isn't all based upon the "official" stable distro's. I'd much
> rather have my entire development environment be identical to everyone
> else's; so people can focus their time and effort on doing <whatever>,
> not trying to figure out why their stuff doesn't build.

I'm not sure what you're wishing for here.  Are you wishing for binaries
of EPICS Base, synApps, areaDetector, etc.?  So you would ideally
install those binaries and then compile your own software that depends
on them?

Regards,

Lewis

Replies:
Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
References:
Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
Re: Unable to build support modules on Windows, with base 3.15.2 Jani Hakala
RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
Re: Unable to build support modules on Windows, with base 3.15.2 Bob Soliday
RE: Unable to build support modules on Windows, with base 3.15.2 Mark Rivers
RE: Unable to build support modules on Windows, with base 3.15.2 Mark S. Engbretson

Navigate by Date:
Prev: RE: Unable to build support modules on Windows, with base 3.15.2 Mark S. Engbretson
Next: RE: Unable to build support modules on Windows, with base 3.15.2 Heesterman, Peter J
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Unable to build support modules on Windows, with base 3.15.2 Mark S. Engbretson
Next: Re: Unable to build support modules on Windows, with base 3.15.2 Kevin Peterson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024