1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: EPICS-Arduino Serial Communication via Asyn-Stream Drivers |
From: | Mark Rivers <[email protected]> |
To: | 'Hulusi Öz' <[email protected]>, "[email protected]" <[email protected]> |
Date: | Mon, 25 Jul 2016 21:29:23 +0000 |
If you have a computer with a serial port (or USB to serial adapter) you can just connect pin 2 to pin 3 (loopback) and can write code that sends messages and receives messages
over hardware. Simple to set up, and it will get you going with real hardware. You can use StreamDevice, the asynRecord, and other code for testing an experimenting. Mark From: Hulusi Öz [mailto:[email protected]]
How can i solve that problem ? Can I re-configure it with EPICS functionally ? Yes, I want to talk a real hardware. But, since I am new at this area, I thought, if I can do database stuff with arduino in terms of serial communication, I may handle with a real hardware. I don't know what the things requires for Caen digitizier, the things may change from hardware to hardware. I mean, talking to arduino and Caen digitizer may not be the same stuff. But, I've just started at some point. Best Regards.. 2016-07-25 22:51 GMT+03:00 Mark Rivers <[email protected]>: The files arduino.db and /opt/epics/helloWorld/db/helloWorldIOC.db are some local files that were specific to the application in that Web page you found. They don’t come with EPICS
base. What is it you would like to try before beginning to work with the Caen digitizer? Talking to real hardware? Mark From:
[email protected] [mailto:[email protected]]
On Behalf Of Hulusi Öz Hi Everyone, I have just been dealing with EPICS and its applications since a few weeks. I've done basic things such as creating IOC, making MEDM display,communicating Octave and etc..And I've
got help most of the time in this tech-talk. I am now dealing with communication a device that is supported by EPICS. I have got a Digitizier which is manufactured by CAEN. But before I deal with that device, I want to figure
out the database configuration in an application. Therefore, I research on the Internet and in this website. I found a quite basic example which is : I've just done the previous sections of this example,and also followed the steps in that link. However, when I run it I've got nothing. More specifically : #!/opt/epics/helloWorldIOC/bin/linux-x86_64/helloWorldIOC ## You may have to change helloWorldIOC to something else ## everywhere it appears in this file #< envPaths epicsEnvSet(STREAM_PROTOCOL_PATH,"helloWorldIOCApp/Db") ## Register all support components dbLoadDatabase("../../dbd/helloWorldIOC.dbd",0,0) helloWorldIOC_registerRecordDeviceDriver(pdbbase) drvAsynSerialPortConfigure("SERIALPORT","/dev/ttyACM0",0,0,0) asynSetOption("SERIALPORT",-1,"baud","115200") asynSetOption("SERIALPORT",-1,"bits","8") asynSetOption("SERIALPORT",-1,"parity","none") asynSetOption("SERIALPORT",-1,"stop","1") asynSetOption("SERIALPORT",-1,"clocal","Y") asynSetOption("SERIALPORT",-1,"crtscts","N") dbLoadRecords("db/arduino.db","PORT='SERIALPORT'") filename="../dbLexRoutines.c" line number=240 No such file or directory dbRead opening file db/arduino.db ## Load record instances dbLoadRecords("/opt/epics/helloWorld/db/helloWorldIOC.db","user=hulusi") filename="../dbLexRoutines.c" line number=240 No such file or directory dbRead opening file
/opt/epics/helloWorld/db/helloWorldIOC.db iocInit() Starting iocInit ############################################################################ ## EPICS R3.14.12.4 $Date: Mon 2013-12-16 15:51:45 -0600$ ## EPICS Base built Jul 21 2016 ############################################################################ iocRun: All initialization complete ## Start any sequence programs #seq snchelloWorldIOC,"user=hulusi" I guess, the problem is due to the colored line in this output. But I'm not sure that. Is it so ? If it is like that, how can I figure it out ? If it isn't like that, what does the thing cause this problem ? Thanks in advance.. Best regards.. Hulusi |