1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: SOLEIL's TimEx3 |
From: | "Goetze, Kurt A." <[email protected]> |
To: | "Rivers, Mark L." <[email protected]>, "Engbretson, Mark S." <[email protected]>, 'Silver' <[email protected]>, 'Talk EPICS Tech' <[email protected]> |
Date: | Fri, 11 May 2018 21:25:53 +0000 |
Mark E’s link points to the earlier (VME/IP based) version of softGlue.
There is also a newer softGlue based on the Avnet MicroZed, which has a Xilinx Zynq-7000 SoC (system on a chip). This SoC has an FPGA and a dual-core ARM processor
on the same chip. We’re running EPICS on a Linux soft ioc on the ARM processor, and the softGlue logic on the FPGA.
http://zedboard.org/product/microzed https://github.com/epics-modules/softGlueZynq/blob/master/documentation/README.md (click on “softGlueZynqDoc.html”) Kurt From: [email protected] <[email protected]>
On Behalf Of Mark Rivers There is also the higher-end PandaBox. This also an opensource hardware project with EPICS support. http://quantumdetectors.com/pandabox/
Mark From:
[email protected] [mailto:[email protected]]
On Behalf Of Mark Engbretson Is this something that you already have any want to use? If so, drivers for what? Epics?
If this is for a new project that you don’t already have hardware for, there are more recent/modern FPGA implementations that are slightly more off the shelf
solutions. i.e., EPICS softGlue. https://epics.anl.gov/bcda/synApps/softGlue/softGlueDoc.html From:
[email protected] <[email protected]>
On Behalf Of Silver hi, all: Can anyone share software drivers for SOLEIL's TimEx3 boards? Its a opensource hardware project can be found here: Thanks a lot in advance. Best wishes Geyang 2018-05-12 |