1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | areaDetector R3-3-2 released |
From: | Mark Rivers <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Mon, 9 Jul 2018 17:12:05 +0000 |
New releases of the following areaDetector modules are now available. areaDetector R3-3-2 ADCore R3-3-2 **************************************************************************************** These are from the R3-3-2 release notes for areaDetector: * configure/EXAMPLE_CONFIG_SITE.local Added new WITH_QSRV variable. 3.14.12 supports pvAccess but does not support qsrv. By setting WITH_PVA=YES and WITH_QSRV=NO IOCs can be built with pvAccess support but without qsrv support. **************************************************************************************** These are from the R3-3-3 release notes for ADCore: * Changed so that qsrv dbd and lib files are only included if WITH_QSRV=YES. Previously they were included if WITH_PVA=YES. However base 3.14.12 supports WITH_PVA but does not support qsrv. This allows WITH_PVA=YES to be used on 3.14.12 as long as WITH_QSRV=NO. **************************************************************************************** The home page is here: http://cars.uchicago.edu/software/epics/areaDetector.html The top-level documentation is here: http://cars.uchicago.edu/software/epics/areaDetectorDoc.html Installation instructions are here: https://github.com/areaDetector/areaDetector/blob/master/INSTALL_GUIDE.md areaDetector release notes are here: https://github.com/areaDetector/areaDetector/blob/master/RELEASE.md ADCore release notes are here: https://github.com/areaDetector/ADCore/blob/master/RELEASE.md Mark