RE: Oxford Cryosystems controller driver support

["James.OHea@diamond.ac.uk" <James.OHea@diamond.ac.uk>]

Hello,

 

We have an EPICS support module for the Cryostream 800 from Oxford Cryo.  You are welcome to a copy of that if it will help?

 

James

 

Diamond Light Source

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Lang, Keenan C.
Sent: 11 July 2018 16:25
To: Allan Serra Braga Bugyi; tech-talk@aps.anl.gov
Subject: Re: Oxford Cryosystems controller driver support

 

https://anl.box.com/s/mcgmkhpif6t5myt8icecfjpxyt9y421x

 

We've got a serially connected N-Helix that is run using a sequencer program. The above link contains what you should need. The protocol is described here:

 

http://oxcryo.com/serialcomms/700series/nh_status.html

 

if there's any issues with what I have. Also, the adl screens that are in there might be out of date compared to the caqtdm screens that are included.

 

---

From: tech-talk-bounces@aps.anl.gov <tech-talk-bounces@aps.anl.gov> on behalf of Allan Serra Braga Bugyi <allan.bugyi@lnls.br>
Sent: Wednesday, July 11, 2018 8:22:11 AM
To: tech-talk@aps.anl.gov
Subject: Oxford Cryosystems controller driver support

 

Hello everybody,

 

I couldn't find any topic talking about Oxford Cryosystems Controller driver support but these:

https://epics.anl.gov/tech-talk/2006/msg00986.php

https://epics.anl.gov/tech-talk/2007/msg01579.php

https://epics.anl.gov/tech-talk/2006/msg00985.php

https://epics.anl.gov/tech-talk/2012/msg02022.php

with the last one mentioning an IOC used at the Australian Light Source. We have here an N-Helix cryostream to be integrated in EPICS. Any help is welcome.

Thank you very much,

Allan S. B. Bugyi
Technology Development Analyst
allan.bugyi@lnls.br
(+55 19) 3512-3520

SOL/Beamline Software Group
Brazilian Synchrotron Light Laboratory (LNLS)
Center of Research in Energy and Materials (CNPEM)
http://lnls.cnpem.br

 

 

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom