Re: Oxford Cryosystems controller driver support

["Lang, Keenan C." <klang@aps.anl.gov>]

https://anl.box.com/s/mcgmkhpif6t5myt8icecfjpxyt9y421x

We've got a serially connected N-Helix that is run using a sequencer program. The above link contains what you should need. The protocol is described here:

http://oxcryo.com/serialcomms/700series/nh_status.html

if there's any issues with what I have. Also, the adl screens that are in there might be out of date compared to the caqtdm screens that are included.

---

From: tech-talk-bounces@aps.anl.gov <tech-talk-bounces@aps.anl.gov> on behalf of Allan Serra Braga Bugyi <allan.bugyi@lnls.br>
Sent: Wednesday, July 11, 2018 8:22:11 AM
To: tech-talk@aps.anl.gov
Subject: Oxford Cryosystems controller driver support

 

Hello everybody,

I couldn't find any topic talking about Oxford Cryosystems Controller driver support but these:

https://epics.anl.gov/tech-talk/2006/msg00986.php

https://epics.anl.gov/tech-talk/2007/msg01579.php

https://epics.anl.gov/tech-talk/2006/msg00985.php

https://epics.anl.gov/tech-talk/2012/msg02022.php

with the last one mentioning an IOC used at the Australian Light Source. We have here an N-Helix cryostream to be integrated in EPICS. Any help is welcome.

Thank you very much,

Allan S. B. Bugyi
Technology Development Analyst
allan.bugyi@lnls.br
(+55 19) 3512-3520

SOL/Beamline Software Group
Brazilian Synchrotron Light Laboratory (LNLS)
Center of Research in Energy and Materials (CNPEM)
http://lnls.cnpem.br