Experimental Physics and Industrial Control System
Hi Jesse,
I just added support to the driver and .template file for a new InputPolarity record for the SIS3820. I have also updated the medm screen, and the .req file for autosave.
I am away from the lab, so I have not tested it yet. But you can get the master branch of mca from Github and see if it works for you.
Mark
________________________________
From: [email protected] <[email protected]> on behalf of Jesse Hopkins <[email protected]>
Sent: Wednesday, August 8, 2018 10:46 AM
To: [email protected]
Subject: Inverting control inputs on SIS3280?
Hi all,
I have an SIS3280 that I want to use the inhibit count signal for (this can be done on input 4 in mode 2, for example). Unfortunately,I want to inhibit on a TTL low signal, while my SIS3820 requires an active high inhibit. The SIS3820 does support inverting the control inputs, by setting bit 19 in the Acquisition Operation Mode. I didn't see it as a record in the documentation (http://cars9.uchicago.edu/software/epics/mcaStruck.html). Is there a way to do this from the EPICS driver? If not, is this something that you would consider adding to the driver?
(I could invert the signal externally, but it would be nice to avoid that complication)
Thanks.
- Jesse
----
Jesse Hopkins, PhD
Beamline Scientist
BioCAT, Sector 18
Advanced Photon Source
- Replies:
- Re: Inverting control inputs on SIS3280? Jesse Hopkins
- References:
- Inverting control inputs on SIS3280? Jesse Hopkins
- Navigate by Date:
- Prev:
Re: dbGetPdbAddrFromLink dropped from 3.15 again Johnson, Andrew N.
- Next:
Re: dbGetPdbAddrFromLink dropped from 3.15 again Till Straumann
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Inverting control inputs on SIS3280? Jesse Hopkins
- Next:
Re: Inverting control inputs on SIS3280? Jesse Hopkins
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024