EPICS CA SERVER setup and build

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	CA SERVER setup and build
From:	אייל פרחי/Eyal Farchi <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Sun, 7 Oct 2018 19:49:25 +0000

Hello I'm new to EPICS. I have success to build basic EPICS application and read pv value.
I'm using sentOs( Linux), and EPICS 3.16 on 2 machines. I'm trying to set one machine as server and one as client and read pv's values with no success. Both machines are connected to the
same network switch.
How I build ca server and make him readable on the network?
Thanks for your help

Replies:: Re: CA SERVER setup and build Mark Rivers

Navigate by Date:: Prev: about talking to other record in device support and converting string to int ori spokoini; Next: Re: about talking to other record in device support and converting string to int Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: about talking to other record in device support and converting string to int Mark Rivers; Next: Re: CA SERVER setup and build Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024