Thanks for all the suggestions.
As always with nice open source
software the choices are many, I will give some of them a try.
Best
Bo
On 23/01/2019 22.32, Maren Purves
wrote:
We
run alh here (to send email, the 'user interface' is on a virtual
display that nobody looks at) and it works fine on CentOS5 and
CentOS6
(with EPICS 3.13.8 ...)
I may try out your new one, Rolf, thanks for that!
Maren Purves
East Asian Observatory
On 1/23/19 09:52, Rolf Keitel via Tech-talk wrote:
Hi Bo,
You don’t say what platform you want to run this on.
The old EPICS alarm handler alh, a standard EPICS extension
would do what you want (alh is using Motif, but not maintained
any more).
https://epics.anl.gov/extensions/alh/index.php
We have a fully alh-compatible alarm handler which uses Qt. It
is run here as the production alarm handler.
http://isacwserv.triumf.ca/epics/TAlh/
- rolf -
Rolf Keitel, Ph.D
TRIUMF, 4004 Wesbrook Mall
Vancouver, BC, V6T 2A3
Tel.: 604 222 7453
e-mail: [email protected] <mailto:[email protected]>
*From:*[email protected]
<[email protected]> *On Behalf Of *Bo Jakobsen
via Tech-talk
*Sent:* January 22, 2019 2:00 AM
*To:* [email protected]
*Subject:* Simple alarm monitor
Hi all
I am looking for a "simple alarm monitor".
The ones I found all seems to be to large a framework to set up
for what I am trying to do on a small scale.
I would just like a monitor program which monitors a small
number of PV's (order of 50)
* Writes to a log when the PV goes into or out of Alarm status
* Potentially can call a external program the an alarm happens
(for e.g. sending a text messeage or mail).
I was considering to write something in python, but if something
like this already exists that would be easier :-)
Best
Bo
|