1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: EPICS and VXI query |
From: | "Moore, Tom via Tech-talk" <[email protected]> |
To: | Mark Rivers <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Thu, 21 Feb 2019 16:53:01 +0000 |
Hi Mark Thank you very much for your response. We have received a similar view from two other knowledgeable people, so it seems that our designer’s view is
out-of-date. We will investigate further…
Many thanks Tom Moore Procurement Manager Procurement United Kingdom Atomic Energy Authority Culham Science Centre Abingdon Oxfordshire OX14 3DB Email:
[email protected] Mob: +44 (0) 7968 768 490 Tel: +44 (0) 1235 466 226 From: Mark Rivers <[email protected]>
Hi Tom, It appears to me that ITER does have drivers for some NI PXI devices.
https://static.iter.org/codac/cs/CODAC_Core_System_Overview_34SDZ5_v6_1.pdf
However, I am not sure that those are open source because of the ITER contractual agreements. You might want to discuss this off-line with Ralph Lange. Mark From:
[email protected] <[email protected]>
On Behalf Of Moore, Tom via Tech-talk Dear All We are trying to decide on a SCADA system for the MTF test rig project at UK Atomic Energy Authority. Our preference is for EPICS but one of our designers has raised the following
concern: Could anyone provide some advice on this? It seems that other users must have encountered this issue before. We would like to avoid use of a proprietary system if possible.
Many thanks Tom Moore Procurement Manager Procurement United Kingdom Atomic Energy Authority Culham Science Centre Abingdon Oxfordshire OX14 3DB Email:
[email protected] Mob: +44 (0) 7968 768 490 Tel: +44 (0) 1235 466 226 |