Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	RE: EPICS and VXI query
From:	Mark Rivers via Tech-talk <[email protected]>
To:	"'Moore, Tom'" <[email protected]>
Cc:	"[email protected]" <[email protected]>
Date:	Thu, 21 Feb 2019 16:41:28 +0000

Hi Tom,

It appears to me that ITER does have drivers for some NI PXI devices.

https://epics.anl.gov/meetings/2014-10/presentations/Wednesday/ITER%20Fast%20Controller%20EPICS%20support.pdf

https://static.iter.org/codac/cs/CODAC_Core_System_Overview_34SDZ5_v6_1.pdf

However, I am not sure that those are open source because of the ITER contractual agreements. You might want to discuss this off-line with Ralph Lange.

Mark

From: [email protected] <[email protected]> On Behalf Of Moore, Tom via Tech-talk
Sent: Wednesday, February 20, 2019 3:00 AM
To: [email protected]
Subject: EPICS and VXI query

Dear All

We are trying to decide on a SCADA system for the MTF test rig project at UK Atomic Energy Authority. Our preference is for EPICS but one of our designers has raised the following concern:

Could anyone provide some advice on this? It seems that other users must have encountered this issue before. We would like to avoid use of a proprietary system if possible.

Many thanks

Tom Moore

Procurement Manager

Procurement

United Kingdom Atomic Energy Authority

Culham Science Centre

Abingdon

Oxfordshire

OX14 3DB

Email: [email protected]

Mob: +44 (0) 7968 768 490

Tel: +44 (0) 1235 466 226