1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | SmarAct MCS2 ASCII-based IOC |
From: | "Stubbs Scott Allen \(PSI\) via Tech-talk" <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Wed, 17 Jul 2019 09:31:29 +0000 |
Dear Tech-talkers, As it seems there is no fully ASCII-‘byte stream’ based IOC for the SmarAct MCS2 (at least not available publicly) I am pleased to present our first attempt at one using StreamDevice. I began developing it based on our MCS IOC when we
believed we would need to integrate the MCS2 for a particular project. As we purchased the MCS in the end, and we have no MCS2 units for testing, our development has also stopped for the time being. Comments, forks, additions and/or fixes welcome. Note that while we have put some effort in converting commands and EPICS records from the MCS (e.g. positioner types, amplifier voltage…) this is a completely untested IOC and still based
around our internal PSI build system. However, the db/ and cfg/ files can be considered universal. If I get permission from SmarAct I will publish their full documentation here as well. Also, a special thank you to SLAC colleagues who gave me a starting point for the protocol file =) Link: https://github.com/paulscherrerinstitute/smaract_mcs2/ Greetings from Switzerland, Scott __________________________________________ Controls Group Paul Scherrer Institut
|