1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | pvput and enum (EPICS 7.0.3) |
From: | Alfio Rizzo via Tech-talk <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Wed, 21 Aug 2019 13:24:29 +0000 |
HI I am running a simple ioc with a bi record record(bi, "$(user):SimulationMode") { field(DESC, "Operational Status") field(ZNAM, "NO") field(ONAM, "YES") field(PINI, "YES") field(VAL, "0") } And I was wondering why I cannot change its value (0/1) via pvput unless I use –p ca option. Instead pvmnonitor and pvget are working fine. If I put this line on the record definition
field(INP , "$(user):SimulationMode.RVAL") Then I can change the .RVAL via pvput and then VAL will change accordingly Why does pvput work only with Scalar and not with Enum field ? Is this a feature ? Thanks Best PhD Alfio Rizzo Control System Integrator Integrated Control Systems Division European Spallation Source ERIC Telephone: +46(0)721792342 Mail Address: P.O Box 176, SE 221 00 Lund, Sweden Visiting address: Odarslövsvägen 113, Lund https://europeanspallationsource.se/ |