1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | error binding socket |
From: | Alfio Rizzo via Tech-talk <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Sat, 28 Sep 2019 16:56:49 +0000 |
Hi I am running epics 7.0.3 release on a debian shell on windows10 When I start my ioc I get this error ……. Error binding socket 192.168.0.255:5076: Cannot assign requested address.
Error binding socket 224.0.0.128:5076: Cannot assign requested address. But apparently the IOC is initialized correctly CA and PV commands (pvget,camonitor, pvmonitor,caput,etc..) works correctly, I got what I expect. Only with PV commands I got again the error together with the (correct) output of the command, e.g. >pvget gnappo:SimulationMode
Error binding socket 192.168.0.255:5076: Cannot assign requested address.
Error binding socket 224.0.0.128:5076: Cannot assign requested address.
gnappo:SimulationMode 2019-09-28 18:45:13.764 (1) YES Any idea ? Thanks Best Alfio PhD Alfio Rizzo Control System Integrator Integrated Control Systems Division European Spallation Source ERIC Telephone: +46(0)721792342 Mail Address: P.O Box 176, SE 221 00 Lund, Sweden Visiting address: Odarslövsvägen 113, Lund https://europeanspallationsource.se/ |