Re: error binding socket

["Hill, Bruce via Tech-talk" <tech-talk@aps.anl.gov>]

Hi Alfio,
Check your env variable EPICS_PVA_ADDR_LIST.
If it's set to those IP addresses and they aren't accessible from your host
it could cause those warnings.

Another possibility is that your windows firewall is blocking  those network adapters
from pvget and your IOC.

Cheers,
- Bruce

On 9/28/19 9:56 AM, Alfio Rizzo via Tech-talk wrote:

Hi

I am running epics 7.0.3 release on a debian shell on windows10

When I start my ioc I get this error

…….

Error binding socket 192.168.0.255:5076: Cannot assign requested address.                   

Error binding socket 224.0.0.128:5076: Cannot assign requested address.

 

But apparently the IOC is initialized correctly

 

CA and PV commands (pvget,camonitor, pvmonitor,caput,etc..) works correctly,

I got what I expect.

Only with PV commands I got again the error together with the (correct) output of the command, e.g.

>pvget gnappo:SimulationMode                                                      

Error binding socket 192.168.0.255:5076: Cannot assign requested address.                   

Error binding socket 224.0.0.128:5076: Cannot assign requested address.                     

gnappo:SimulationMode 2019-09-28 18:45:13.764  (1) YES

 

Any idea ?

Thanks

Best

Alfio

 

 

 

PhD Alfio Rizzo

Control System Integrator

Integrated Control Systems Division

European Spallation Source ERIC

 

Telephone: +46(0)721792342

Mail Address: P.O Box 176, SE 221 00 Lund, Sweden

Visiting address: Odarslövsvägen 113, Lund

 

https://europeanspallationsource.se/

 

 

-- 
Bruce Hill
Member Technical Staff
SLAC National Accelerator Lab
2575 Sand Hill Road M/S 10
Menlo Park, CA  94025