Hi
I am running epics 7.0.3 release on a debian shell on windows10
When I start my ioc I get this error
…….
Error binding socket 192.168.0.255:5076: Cannot assign requested address.
Error binding socket 224.0.0.128:5076: Cannot assign requested address.
But apparently the IOC is initialized correctly
CA and PV commands (pvget,camonitor, pvmonitor,caput,etc..) works correctly,
I got what I expect.
Only with PV commands I got again the error together with the (correct) output of the command, e.g.
>pvget gnappo:SimulationMode
Error binding socket 192.168.0.255:5076: Cannot assign requested address.
Error binding socket 224.0.0.128:5076: Cannot assign requested address.
gnappo:SimulationMode 2019-09-28 18:45:13.764 (1) YES
Any idea ?
Thanks
Best
Alfio
PhD Alfio Rizzo
Control System Integrator
Integrated Control Systems Division
European Spallation Source ERIC
Telephone: +46(0)721792342
Mail Address: P.O Box 176, SE 221 00 Lund, Sweden
Visiting address: Odarslövsvägen 113, Lund
https://europeanspallationsource.se/