Experimental Physics and Industrial Control System
Hi all,
Currently, I do some contractor work for Gemini for a new Application
Development Environment based on RPM.
In this context, I am working on one part of it to provide a framework
for softIOC installation, everything readily set up with conserver
configuration, procServ etc. after installing a respective softIOC RPM.
I do this development work based on a makeBaseApp.pl generated softIOC
example from the EPICS Application Developer's Guide (
https://epics.anl.gov/base/R3-15/6-docs/AppDevGuide/GettingStarted.html#x3-60002.2
). For installing EPICS software using RPM we have to _relocate_
installed binaries, scripts etc. This works well, principally, but
regarding the example softIOC there do arise a few questions:
(1) The startup file under iocBoot (st.cmd) is not installed anywhere.
If INSTALL_LOCATION is not redefined, then this is not a problem, but if
I want to keep the sources distinct from the product, this seems not to
be consequent. I changed the Makefile from
TOP = ../..
include $(TOP)/configure/CONFIG
ARCH = $(EPICS_HOST_ARCH)
TARGETS = envPaths
include $(TOP)/configure/RULES.ioc
to
TOP = ../..
include $(TOP)/configure/CONFIG
ARCH = $(EPICS_HOST_ARCH)
TARGETS = envPaths
SCRIPTS_IOC_Linux += st.cmd
include $(TOP)/configure/RULES.ioc
include $(TOP)/configure/RULES
to install the st.cmd to the binary install dir, at least. Additionally,
I set IOCS_APPL_TOP in CONFIG_SITE to the install location to let
envPaths look right. This works so far. Is this the way to go?
In this context it might also be an idea to create a new template
directory for makeBaseApp.pl and point to it using the -T option. I'd
rather use the EPICS original ones, though, to have no adaption work
with future versions.
(2) Another option I thought about would be to define a User Created
File type
(
https://epics.anl.gov/base/R3-15/6-docs/AppDevGuide/BuildFacility.html#x5-1570004.6.35
), e.g. a FILE_TYPE IOCBOOT which would install this st.cmd to a
INSTALL_IOCBOOT = $(INSTALL_LOCATION)/iocBoot/.... directory, for
example. But same here: it's sort of 'proprietary' to do things like
these and such special solutions might be incompatible with future
versions of EPICS.
Or do I think completely in the wrong direction and there is already a
mechanism in place which to install the startup files to
INSTALL_LOCATION which I simply do not see?
Any help or ideas as well as confirmation appreciated.
Thanks,
Felix
- Replies:
- Re: ioc startup files not installed to INSTALL_LOCATION Matt Rippa via Tech-talk
- References:
- ioc startup file installation Felix Krämer via Tech-talk
- Navigate by Date:
- Prev:
Re: A tribute to our benefactors, errata bob dalesio via Tech-talk
- Next:
Re: A tribute to our benefactors Paul Sichta via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
ioc startup file installation Felix Krämer via Tech-talk
- Next:
Re: ioc startup files not installed to INSTALL_LOCATION Matt Rippa via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024