1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | PerkinElmer Area Detector on Windows 10 [SEC=OFFICIAL] |
From: | "CORNALL, Terry via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 3 Feb 2021 06:44:18 +0000 |
Hi All. I’m running the perkinElmerIOC from the Windows 10 ADPerkinElmer areaDetector-3-8 binary distribution and I get the error: PerkinElmer::initializeDetector, error=39 calling Acquisition_GbIF_Init(&hAcqDesc_=000001E40F1ACB40, nChannelNr=0, bEnableIRQ_=1, uiRows=1024, uiColumns=1024,bSelfInit=1, bInitAlways=0, IDType_=1, IDValue_=000001E40F1B5FC0) Can anyone shed light on this? I have found that error=39 means ‘Can’t load driver’ but as far as I can tell the gbif64.dll is in the right place (assuming that is the driver in question) so I don’t know how to proceed in solving this issue.
Thanks, Terry |