EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Questions about Bruker QM100 detector
From: Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov>
To: "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date: Wed, 3 Feb 2021 06:45:08 +0000

Hello Community!

 

A soft X-ray beamline will be built at SESAME soon and the detector to be used is the Bruker QM100. I know that the MCA module supports this detector, but under windows only, and our standard OS is CentOS for every control system. So my question is, if anyone developed an IOC for this detector under windows, can you please share your experience running the IOC? What was your setup (Windows, compiler, EPICS and modules)? Were there any difficulties in building and running the IOC, data acquisition, etc. or any other issue?

 

One of our colleagues suggested that we might use the DANTE digital pulse processor from XGLab as a readout system for the QM100, it has an EPICS driver and Ethernet interface so that is another route we can go. Does anyone have experience with this pulse processor?

 

Best Regards,

Abdalla.

Replies:
Re: Questions about Bruker QM100 detector Mark Rivers via Tech-talk
Navigate by Date:
Prev: PerkinElmer Area Detector on Windows 10 [SEC=OFFICIAL] CORNALL, Terry via Tech-talk
Next: Re: Re: Re: modbus write registers error to Pilz PLC 高振华 via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024 
Navigate by Thread:
Prev: RE: PerkinElmer Area Detector on Windows 10 [SEC=OFFICIAL] CORNALL, Terry via Tech-talk
Next: Re: Questions about Bruker QM100 detector Mark Rivers via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024 
ANJ, 03 Feb 2021 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·