Experimental Physics and Industrial Control System
I don’t think the Wireshark version will matter. Have you put a filter on what Wireshark captures, or on what is selected to display?
Mark
Sent from my iPhone
On Feb 18, 2021, at 8:26 PM, Li, Ji <liji at bnl.gov> wrote:
Thanks Mark. I expect Wireshark to be install & play. The one I used is an old installation on an old server. Will find another one and try it out.
Best,
-Ji Li
________________________________
发件人: Mark Rivers <rivers at cars.uchicago.edu>
发送时间: 2021年2月18日 20:11
收件人: Li, Ji <liji at bnl.gov>
抄送: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
主题: RE: How to capture messages generated by PyEpics?
Ø When I get/set from PyEpics (tried both PV module and CA module), the program was able to successfully get the up-to-date value of the PV and set new value to it,
Ø > but no messages showed up. Doesn't PyEpics communicate using CA protocol messages? Are there specific filter/configuration to be done in Wireshark to show these messages?
There is no difference in the CA network messages using caget and PyEpics. They both use the same libca.so library from EPICS base.
You must have something configured wrong in Wireshark or something.
Mark
From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Li, Ji via Tech-talk
Sent: Thursday, February 18, 2021 4:52 PM
To: tech-talk at aps.anl.gov
Subject: How to capture messages generated by PyEpics?
Hi,
I'm trying to capture CA messages targeting a specific PV on the IOC server with Wireshark (v1.12.1) and Michael Davidsaver's cashark plugin (ca.pv or ip.addr as the filter). Wireshark was able to capture messages generated by caget/caput commands ran from bash. When I get/set from PyEpics (tried both PV module and CA module), the program was able to successfully get the up-to-date value of the PV and set new value to it, but no messages showed up. Doesn't PyEpics communicate using CA protocol messages? Are there specific filter/configuration to be done in Wireshark to show these messages? Thanks.
-Ji Li
- Replies:
- 回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- References:
- How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- RE: How to capture messages generated by PyEpics? Mark Rivers via Tech-talk
- 回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- Navigate by Date:
- Prev:
回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- Next:
回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
- Navigate by Thread:
- Prev:
回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- Next:
回复: How to capture messages generated by PyEpics? Li, Ji via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024