1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | aravisGigE: no device found |
From: | Hasan SANSAR via Tech-talk <tech-talk at aps.anl.gov> |
To: | tech-talk at aps.anl.gov |
Date: | Wed, 25 Aug 2021 22:19:10 +0300 |
Hi all,I built aravisGigE R3-0 with areaDetector R3-3-1 and EPICS 3.15.8 on CentOS 7.9 on VirtualBox. I think there is no problem on building of EPICS, areaDetector and aravisGigE, because the driver was built.
The other properties of my environment: asynDriver from GitHub, sequencer 2.2.9, autosave 5.7.1, busy 1.6.1, sscan 2.10, calc 3.6.1, ipac 2.7, iocStats on GitHub, ADCore R3-3-1, ADViewers R1-1, ADSupport R1-4.
When I try to get informations from Baumer VLG-20M CCD camera with arv-tool-0.6, I'm getting warning "no device found". But, the commercial software of camera is running on my host machine(Linux Mint 21.04).
And I can get ping from camera IP, but telnet command timed out.How can I solve this problem? Should I change environment I use? Or else, could it just be a network problem caused by a camera or CentOS 7.9?
-- Hasan Sansar