1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EPICS startup script st.cmd on vxWorks warning message |
From: | whitetiger1123 via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 23 Nov 2022 17:40:17 +0900 |
Hello all, While running EPICS startup script st.cmd on vxWorks for an app that was made successfully, I am getting following error: [VxWorks Boot]: @ boot device : geisc unit number : 0 processor number : 0 host name : host file name : /home/test/work2/vxconf/default/vxWorks inet on ethernet (e) : 10.4.49.69:ffffff00 host inet (h) : 10.4.49.170 gateway inet (g) : 10.4.49.99 user (u) : test ftp password (pw) : test flags (f) : 0x0 startup script (s) : host:/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd Loading... 2457184 Starting at 0x100000... Target Name: vxTarget Adding 7851 symbols for standalone. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]] ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]] ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]] ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]] ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System ]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks 6.9 ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.13 ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2011 CPU: Motorola MVME6100-0173 - MPC 7457. Processor #0. Memory Size: 0x40000000 (1024Mb). BSP version 6.9/0. Created: Nov 11 2022, 13:44:33 ED&R Policy Mode: Deployed WDB Comm Type: WDB_COMM_END WDB: Agent Disabled. Executing startup script 'host:/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd'... ## Example vxWorks startup file ## The following is needed if your board support package doesn't at boot time ## automatically cd to the directory containing its startup script #cd "/home/USERNAME/epics/iocs/omsIOC/iocBoot/iocOms" cd "/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms" value = 0 = 0x0 < cdCommands startup = "/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms" New symbol "startup" added to kernel symbol table. startup = 0x44f7f50: value = 72359072 = 0x4501ca0 putenv("IOC=iocOms") value = 0 = 0x0 top = "/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC" New symbol "top" added to kernel symbol table. top = 0x4501c20: value = 72359296 = 0x4501d80 = top + 0x160 putenv("TOP=/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC") value = 0 = 0x0 topbin = "/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/bin/vxWorks-ppc32" New symbol "topbin" added to kernel symbol table. topbin = 0x4501ec0: value = 72359696 = 0x4501f10 = topbin + 0x50 motor = "/home/test/epics/synApps_6_1/support/motor-R7-1" New symbol "motor" added to kernel symbol table. motor = 0x4501e90: value = 72359856 = 0x4501fb0 = topbin + 0xf0 putenv("MOTOR=/home/test/epics/synApps_6_1/support/motor-R7-1") value = 0 = 0x0 motorbin = "/home/test/epics/synApps_6_1/support/motor-R7-1/bin/vxWorks-ppc32" New symbol "motorbin" added to kernel symbol table. motorbin = 0x44cf4f0: value = 72327040 = 0x44f9f80 asyn = "/home/test/epics/synApps_6_1/support/asyn-R4-36" New symbol "asyn" added to kernel symbol table. asyn = 0x44f9fe0: value = 72367504 = 0x4503d90 putenv("ASYN=/home/test/epics/synApps_6_1/support/asyn-R4-36") value = 0 = 0x0 asynbin = "/home/test/epics/synApps_6_1/support/asyn-R4-36/bin/vxWorks-ppc32" New symbol "asynbin" added to kernel symbol table. asynbin = 0x4503e80: value = 72367824 = 0x4503ed0 = asynbin + 0x50 sncseq = "/home/test/epics/synApps_6_1/support/seq-2-2-6" New symbol "sncseq" added to kernel symbol table. sncseq = 0x4503f30: value = 72368000 = 0x4503f80 = sncseq + 0x50 putenv("SNCSEQ=/home/test/epics/synApps_6_1/support/seq-2-2-6") value = 0 = 0x0 sncseqbin = "/home/test/epics/synApps_6_1/support/seq-2-2-6/bin/vxWorks-ppc32" New symbol "sncseqbin" added to kernel symbol table. sncseqbin = 0x4503fc0: value = 72364144 = 0x4503070 = 'p' busy = "/home/test/epics/synApps_6_1/support/busy-R1-7-2" New symbol "busy" added to kernel symbol table. busy = 0x44cb710: value = 72364560 = 0x4503210 putenv("BUSY=/home/test/epics/synApps_6_1/support/busy-R1-7-2") value = 0 = 0x0 busybin = "/home/test/epics/synApps_6_1/support/busy-R1-7-2/bin/vxWorks-ppc32" New symbol "busybin" added to kernel symbol table. busybin = 0x4503fe0: value = 72364848 = 0x4503330 = '0' ipac = "/home/test/epics/synApps_6_1/support/ipac-2-15" New symbol "ipac" added to kernel symbol table. ipac = 0x4503390: value = 72365024 = 0x45033e0 = ipac + 0x50 putenv("IPAC=/home/test/epics/synApps_6_1/support/ipac-2-15") value = 0 = 0x0 epics_base = "/home/test/epics/base-3.15.6" New symbol "epics_base" added to kernel symbol table. epics_base = 0x45034b0: value = 72365312 = 0x4503500 = epics_base + 0x50 putenv("EPICS_BASE=/home/test/epics/base-3.15.6") value = 0 = 0x0 epics_basebin = "/home/test/epics/base-3.15.6/bin/vxWorks-ppc32" New symbol "epics_basebin" added to kernel symbol table. epics_basebin = 0x45035d0: value = 72365616 = 0x4503630 = '0' = epics_basebin + 0x60 < ../nfsCommands #Instructions for creating and using a real nfsCommands file # # in order to use nfs do the following: # 1) Create hostAdd and nfsMount commands for each nfs server # 2) In each st.cmd file add the following two commands BEFORE any load commands # ../nfs.cmd # cd "<iocname> # # The hostAdd command has the form: # hostAdd("<host>","xxx.xxx.xxx.xxx") # # The vxWorks nfsMount command has the form: # nfsMount("<host>") # # You can also mount subdirectories as follows: # nfsMount("<host>", "/xxx/xxx/xxx", "/xxx") # # For example assume # # host is mercury with inet address 155.77.2.56 # You want to mount the directory (which is a file system of mercury) # /home/mercury5/iocinfo # as # /iocinfo # # The commands would be # # hostAdd("mercury","155.77.2.56") # nfsMount("mercury","/home/mercury5/iocinfo","/iocinfo") cd topbin value = 0 = 0x0 ## You may have to change oms to something else ## everywhere it appears in this file ld 0,0, "oms.munch" BSP routine sysAtReboot() not found, epicsExit() will not be called by reboot. For reduced functionality, call rebootHookAdd(epicsExitCallAtExits) value = 72413200 = 0x450f010 ## Register all support components cd top value = 0 = 0x0 dbLoadDatabase "dbd/oms.dbd" value = 0 = 0x0 oms_registerRecordDeviceDriver pdbbase value = 0 = 0x0 cd startup value = 0 = 0x0 ## motorUtil (allstop & alldone) dbLoadRecords("$(MOTOR)/db/motorUtil.db", "P=oms:") value = 0 = 0x0 ## Support for the OMS MAXv (VxWorks shell or iocsh) #< MAXv.cmd #< MAXv.iocsh ## Support for the OMS VME85 #< VME58.cmd ## Support for the OMS VME8 and VME44 #< VME8.cmd ## Support for the OMS PC68 and PC78 (requires asyn) #< PC68.cmd iocInit Starting iocInit ############################################################################ ## EPICS R3.15.6 ## EPICS Base built Oct 7 2022 ############################################################################ WARNING: OS Clock time was read before being set. Using 1990-01-02 00:00:00.000000 UTC iocInit: Time provider has not yet synchronized. iocRun: All initialization complete value = 0 = 0x0 ## motorUtil (allstop & alldone) motorUtilInit("oms:") value = 0 = 0x0 # Boot complete Done executing startup script 'host:/home/test/epics/synApps_6_1/support/motor-R7-1/modules/motorOms/iocs/omsIOC/iocBoot/iocOms/st.cmd'. I hope you understand Iam new to the world of EPICS. Casual I’ve been trying to understand them for 3 days. From there to before he knew nothing of them. I hope you can help. Thanks and regards. |