1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Simulated limit switches on motorSim motor |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | Torsten Bögershausen <Torsten.Bogershausen at ess.eu>, "Nariyoshi, Pedro" <nariyosh at frib.msu.edu>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 29 Nov 2023 18:01:24 +0000 |
We heavily use Tim’s other 2-slit database at our beamlines: optics/opticsApp/Db/2slit.db at master · epics-modules/optics (github.com) Mark From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of
Torsten Bögershausen via Tech-talk Hej Pedro, If you are working with a slit, it may be useful to look at a slit system developed by Tim Mooney: <https://github.com/epics-modules/optics/blob/master/opticsApp/Db/2slit_soft.vdb> I had stolen that once, redone stuff and tested. But I don’t know, what the actual status is, at the end, we decided to do the slit code inside the motion controller. To be honest, we are not there fully yet, handling all the corner cases. Which controller do you use ? And not using the sim-motor. I any way, it seems as if everybody (“tm”) uses 4 motors : 2 physical motors (the blades, or arms) Of course, for a typical slit system you need to duplicate the setup: Hope that things work out, please let us know, how it goes
😉 From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of "Nariyoshi, Pedro via Tech-talk"
<tech-talk at aps.anl.gov> Hi, I am working on creating virtual motors to control some slits. One problem I have is that I couldn't find a way to set the HLS/LLS/RHLS/RLLS fields. Is there a way to control these (whether having an input link
to these values or a writing them directly with a calcout or bo record)? Thank you very much
|