Re: AreaDetectors - ADPylon

[Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>]

Hi Donny,

• However I am still not able to run the st.cmd file. I get the error "syntax error near unexpected token errlogInit(20000). 

Please send the complete output when the IOC starts up.

Mark

---

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Donny Domagoj Cosic via Tech-talk <tech-talk at aps.anl.gov>
Sent: Tuesday, April 30, 2024 8:29 AM
To: Jörn Dreyer <j.dreyer at hzdr.de>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: AreaDetectors - ADPylon

 

Hi Jörn,

Thank you for the suggestion. I am running the IOC in Linux and this is
correctly configured.
I was able to use Wong suggestion "make envPaths" to generate this file
successfully. However I am still not able to run the st.cmd file. I get
the error "syntax error near unexpected token errlogInit(20000). It
seems like it is not finding EPICS_BASE.

Any suggestions?
---
Donny Domagoj Cosic

Laboratory for Ion Beam Interactions
Ruđer Bošković Institute
Bijenička cesta 54 | HR-10 000 Zagreb | CROATIA
T: +385 1 4561 041 | @: dcosic at irb.hr | https://urldefense.us/v3/__http://www.irb.hr__;!!G_uCfscf7eWS!bPN0Ned2WfQtvKasArKYVt7OYnyHqT7oxl21oKlGVXBqR3BVyooTU0CR2HINIFvtQUtW8QTJ2biLujCV6jv-mPNCR_5Wrhbr$

Dana 2024-04-30 14:31, Jörn Dreyer via Tech-talk je napisao(la):
> Hi,
>
> if you look into the Makefile of the IOC, its configured for
> linux-x84_64.
> Are you running Linux or windows? If you are using Windows, you have
> to modify the Makefile accordingly.
> Otherwise the envPath file will not be created.
>
> Regards,
>
> Jörn
>
> Am Dienstag, 30. April 2024, 12:57:28 MESZ schrieb Donny Domagoj Cosic
> via Tech-talk:
>> Hello,
>>
>> I successfully compiled AreaDetects R3-13 and added the ADPylon option
>> into the config file with the path to the Pylon SDK (v7.4.0). The
>> ADPylon module was created and I followed the instructions for reading
>> the XML file from a Basler Camera and created the db and adl files
>> using
>> ADGenICam.
>> I modified the st.cmd file in the ADPylon IOC with the address of the
>> camera I want to connect to but when I run the st.cmd file I noticed
>> that the envPaths file is missing from the folder.
>>
>> Do I have to separately compile the ADPylon IOC? If I try this, I get
>> an
>> error that I am missing the Pylon library even though the path is
>> defined to "/opt/pylon/". Could this be because I am using a newer
>> version of Pylon SDK? Which version has been tested with this IOC?
>>
>> Additionally, after I start the IOC, how can I display the video from
>> the camera in CS-Studio Pheobus?
>>
>> Thank you in advance,
>>