Re: AreaDetectors - ADPylon

[Donny Domagoj Cosic via Tech-talk <tech-talk at aps.anl.gov>]

Hi Mark,

Here is the output:

[epics@localhost iocPylon]$ ./st.cmd.ac1920_40gc 
./st.cmd.ac1920_40gc: line 2: syntax error near unexpected token `20000'
./st.cmd.ac1920_40gc: line 2: `errlogInit(20000)'

and the st.cmd file:

< envPaths
errlogInit(20000)

dbLoadDatabase("$(TOP)/dbd/pylonApp.dbd")
pylonApp_registerRecordDeviceDriver(pdbbase)

# The maximum image width; used for row profiles in the NDPluginStats plugin
epicsEnvSet("XSIZE",  "1280")
# The maximum image height; used for column profiles in the NDPluginStats plugin
epicsEnvSet("YSIZE",  "1024")
# Define NELEMENTS to be enough for a 1280x1024x3 (color) image
epicsEnvSet("NELEMENTS", "3932160")

# The CAMERA_ID can be either of the following:
#  Camera serial number
#  Camera index number, starting from 0
epicsEnvSet("CAMERA_ID", "23164488")

epicsEnvSet("GENICAM_DB_FILE", "$(ADGENICAM)/db/Basler_acA1920_40gc.template")

< st.cmd.base

Regards,

---

Donny Domagoj Cosic

Laboratory for Ion Beam Interactions
Ruđer Bošković Institute
Bijenička cesta 54 | HR-10 000 Zagreb | CROATIA
T: +385 1 4561 041 | @: dcosic at irb.hr | www.irb.hr

Dana 2024-04-30 15:44, Mark Rivers je napisao(la):

Hi Donny,

 

• However I am still not able to run the st.cmd file. I get the error "syntax error near unexpected token errlogInit(20000). 

 

Please send the complete output when the IOC starts up.

 

Mark

 

 

---

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Donny Domagoj Cosic via Tech-talk <tech-talk at aps.anl.gov>
Sent: Tuesday, April 30, 2024 8:29 AM
To: Jörn Dreyer <j.dreyer at hzdr.de>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: AreaDetectors - ADPylon

 

Hi Jörn,

Thank you for the suggestion. I am running the IOC in Linux and this is
correctly configured.
I was able to use Wong suggestion "make envPaths" to generate this file
successfully. However I am still not able to run the st.cmd file. I get
the error "syntax error near unexpected token errlogInit(20000). It
seems like it is not finding EPICS_BASE.

Any suggestions?
---
Donny Domagoj Cosic

Laboratory for Ion Beam Interactions
Ruđer Bošković Institute
Bijenička cesta 54 | HR-10 000 Zagreb | CROATIA
T: +385 1 4561 041 | @: dcosic at irb.hr | https://urldefense.us/v3/__http://www.irb.hr__;!!G_uCfscf7eWS!bPN0Ned2WfQtvKasArKYVt7OYnyHqT7oxl21oKlGVXBqR3BVyooTU0CR2HINIFvtQUtW8QTJ2biLujCV6jv-mPNCR_5Wrhbr$

Dana 2024-04-30 14:31, Jörn Dreyer via Tech-talk je napisao(la):
> Hi,
>
> if you look into the Makefile of the IOC, its configured for
> linux-x84_64.
> Are you running Linux or windows? If you are using Windows, you have
> to modify the Makefile accordingly.
> Otherwise the envPath file will not be created.
>
> Regards,
>
> Jörn
>
> Am Dienstag, 30. April 2024, 12:57:28 MESZ schrieb Donny Domagoj Cosic
> via Tech-talk:
>> Hello,
>>
>> I successfully compiled AreaDetects R3-13 and added the ADPylon option
>> into the config file with the path to the Pylon SDK (v7.4.0). The
>> ADPylon module was created and I followed the instructions for reading
>> the XML file from a Basler Camera and created the db and adl files
>> using
>> ADGenICam.
>> I modified the st.cmd file in the ADPylon IOC with the address of the
>> camera I want to connect to but when I run the st.cmd file I noticed
>> that the envPaths file is missing from the folder.
>>
>> Do I have to separately compile the ADPylon IOC? If I try this, I get
>> an
>> error that I am missing the Pylon library even though the path is
>> defined to "/opt/pylon/". Could this be because I am using a newer
>> version of Pylon SDK? Which version has been tested with this IOC?
>>
>> Additionally, after I start the IOC, how can I display the video from
>> the camera in CS-Studio Pheobus?
>>
>> Thank you in advance,
>>