Re: Sequencer RULES_SNCSEQ: No such file or directory

[Florian Feldbauer via Tech-talk <tech-talk at aps.anl.gov>]

Hey,

I made some tests.
After building the sequencer with INSTALL_LOCATION set, I simply deleted 
$(INSTALL_LOCATION)/configure/RULES_BUILD

Now the example IOC builds without errors.

Looking into RULES_BUILD, it seems to me that it tries to include 
$(SNCSEQ)/configure/RULES_SNCSEQ which exists in the source tree (that's 
why everything works if INSTALL_LOCATION is not set) but it does not 
exist in the INSTALL_LOCATION.


Cheers,
Florian


On 9/3/24 14:15, Florian Feldbauer via Tech-talk wrote:
> Hey,
>
> /home/florian/foo/SEQ is actually the location of my example IOC, but 
> I did indeed set INSTALL_LOCATION when building the sequencer.
>
> I also noticed, my test in the clean docker container did only work, 
> because I forgot to set SNCSEQ when building the IOC....after setting 
> it, it fails with the same error.
>
> When installing the sequencer without INSTALL_LOCATION and changing 
> SNCSEQ in my RELEASE.local file accordingly it works.
> So it seems my error is related to that issue.
>
> Thanks for the help!!
>
> Cheers,
> Florian
>
>
> On 9/3/24 13:30, Jure Varlec via Tech-talk wrote:
> > Hi Florian,
> >
> > It looks like the sources for the sequencer are in 
> > /home/florian/foo/SEQ, while the RELEASE file points to 
> > /data/jollyj/florian/epics/modules/sequencer. Are you using 
> > INSTALL_LOCATION? If so, you are being bitten by a known issue: 
> > https://urldefense.us/v3/__https://github.com/epics-modules/sequencer/issues/1__;!!G_uCfscf7eWS!bWUpdhlLeMVzjTpYDucL_nsY1-I2tpXPhNnOss-mPgNZKADeQbsXLaNZ7Wa3xm_2TOkKnMmYIZj0CvVTRGHznW29kEo$ 
> >
> > Best,
> > Jure
> >
> > On 9/3/24 10:23, Florian Feldbauer via Tech-talk wrote:
> > > Caution: This email originated from outside of Cosylab.
> > >
> > >
> > > Hey all,
> > >
> > > I'm using base 7.0.8.1 and sequencer 2.2.9 (both from github)
> > >
> > > When I try to build the example IOC I get  the following error:
> > >
> > > $> makeBaseApp.pl -t example test
> > > $> echo "SNCSEQ=/data/jollyj/florian/epics/modules/sequencer" >
> > > configure/RELEASE.local
> > > $> make
> > > make -C ./configure install
> > > make[1]: Entering directory '/home/florian/foo/SEQ/configure'
> > > perl -CSD
> > > /data/jollyj/florian/epics/epics-base/bin/linux-x86_64/makeMakefile.pl
> > > O.linux-x86_64 ../..
> > > mkdir -p O.Common
> > > make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
> > >     T_A=linux-x86_64 install
> > > make[2]: Entering directory 
> > > '/home/florian/foo/SEQ/configure/O.linux-x86_64'
> > > /data/jollyj/florian/epics/modules/sequencer/configure/RULES_BUILD:4:
> > > /data/jollyj/florian/epics/modules/sequencer/configure//RULES_SNCSEQ: 
> > > No
> > > such file or directory
> > > make[2]: *** No rule to make target
> > > '/data/jollyj/florian/epics/modules/sequencer/configure//RULES_SNCSEQ'.
> > > Stop.
> > > make[2]: Leaving directory 
> > > '/home/florian/foo/SEQ/configure/O.linux-x86_64'
> > > make[1]: ***
> > > [/data/jollyj/florian/epics/epics-base/configure/RULES_ARCHS:58:
> > > install.linux-x86_64] Error 2
> > > make[1]: Leaving directory '/home/florian/foo/SEQ/configure'
> > > make: ***
> > > [/data/jollyj/florian/epics/epics-base/configure/RULES_DIRS:85:
> > > configure.install] Error 2
> > >
> > >
> > > I noticed that RULES_SNCSEQ gets installed in cfg directory instead of
> > > configure.
> > >
> > > Is this a bug or am I missing something in my
> > > RELEASE.local/CONFIG_SITE.local files?
> > >
> > > Or is seq 2.2.9 not compatible with base 7.0.8.1?
> > >
> > > Best regards,
> > > Florian
> > >
> > >
> > > --
> > > Ruhr-Universität Bochum
> > > AG der Experimentalphysik I
> > > Dr. Florian Feldbauer
> > > NB 2/131 / Fach 125
> > > Universitätsstr. 150
> > > D-44801 Bochum
> > >
> > > Office: NB 2/134
> > > Phone:  (+49)234 / 32-23563
> > > Fax:    (+49)234 / 32-14170
> > > https://urldefense.us/v3/__https://paluma.ruhr-uni-bochum.de__;!!G_uCfscf7eWS!cc732TJbQRkhh_n9G4cmkYMcPPsYec5p8gSpSo8kTEO2KecTIr71ZLfhQgXFpZd3wbpXNcdVihAvjYRrsOhqznPzbkUtcbVXOAg$ 
--
Ruhr-Universität Bochum
AG der Experimentalphysik I
Dr. Florian Feldbauer
NB 2/131 / Fach 125
Universitätsstr. 150
D-44801 Bochum

Office: NB 2/134
Phone:  (+49)234 / 32-23563
Fax:    (+49)234 / 32-14170
https://urldefense.us/v3/__https://paluma.ruhr-uni-bochum.de__;!!G_uCfscf7eWS!dziEWfHWbFgPAyX1FRT-RfWvkgd5Xjfik6WqLTh-zYEF30R-iXz7InmSoAOMkd1OjCRBGknax3zr1IxkJZZwprQHG9JltTW0GXk$