Re: Sequencer RULES_SNCSEQ: No such file or directory

[Jure Varlec via Tech-talk <tech-talk at aps.anl.gov>]

Hi Florian,

It looks like the sources for the sequencer are in /home/florian/foo/SEQ, while the RELEASE file points to /data/jollyj/florian/epics/modules/sequencer. Are you using INSTALL_LOCATION? If so, you are being bitten by a known issue: https://urldefense.us/v3/__https://github.com/epics-modules/sequencer/issues/1__;!!G_uCfscf7eWS!bWUpdhlLeMVzjTpYDucL_nsY1-I2tpXPhNnOss-mPgNZKADeQbsXLaNZ7Wa3xm_2TOkKnMmYIZj0CvVTRGHznW29kEo$ 

Best,
Jure

On 9/3/24 10:23, Florian Feldbauer via Tech-talk wrote:
> Caution: This email originated from outside of Cosylab.
>
>
> Hey all,
>
> I'm using base 7.0.8.1 and sequencer 2.2.9 (both from github)
>
> When I try to build the example IOC I get  the following error:
>
> $> makeBaseApp.pl -t example test
> $> echo "SNCSEQ=/data/jollyj/florian/epics/modules/sequencer" >
> configure/RELEASE.local
> $> make
> make -C ./configure install
> make[1]: Entering directory '/home/florian/foo/SEQ/configure'
> perl -CSD
> /data/jollyj/florian/epics/epics-base/bin/linux-x86_64/makeMakefile.pl
> O.linux-x86_64 ../..
> mkdir -p O.Common
> make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
>     T_A=linux-x86_64 install
> make[2]: Entering directory '/home/florian/foo/SEQ/configure/O.linux-x86_64'
> /data/jollyj/florian/epics/modules/sequencer/configure/RULES_BUILD:4:
> /data/jollyj/florian/epics/modules/sequencer/configure//RULES_SNCSEQ: No
> such file or directory
> make[2]: *** No rule to make target
> '/data/jollyj/florian/epics/modules/sequencer/configure//RULES_SNCSEQ'.
> Stop.
> make[2]: Leaving directory '/home/florian/foo/SEQ/configure/O.linux-x86_64'
> make[1]: ***
> [/data/jollyj/florian/epics/epics-base/configure/RULES_ARCHS:58:
> install.linux-x86_64] Error 2
> make[1]: Leaving directory '/home/florian/foo/SEQ/configure'
> make: ***
> [/data/jollyj/florian/epics/epics-base/configure/RULES_DIRS:85:
> configure.install] Error 2
>
>
> I noticed that RULES_SNCSEQ gets installed in cfg directory instead of
> configure.
>
> Is this a bug or am I missing something in my
> RELEASE.local/CONFIG_SITE.local files?
>
> Or is seq 2.2.9 not compatible with base 7.0.8.1?
>
> Best regards,
> Florian
>
>
> --
> Ruhr-Universität Bochum
> AG der Experimentalphysik I
> Dr. Florian Feldbauer
> NB 2/131 / Fach 125
> Universitätsstr. 150
> D-44801 Bochum
>
> Office: NB 2/134
> Phone:  (+49)234 / 32-23563
> Fax:    (+49)234 / 32-14170
> https://urldefense.us/v3/__https://paluma.ruhr-uni-bochum.de__;!!G_uCfscf7eWS!cc732TJbQRkhh_n9G4cmkYMcPPsYec5p8gSpSo8kTEO2KecTIr71ZLfhQgXFpZd3wbpXNcdVihAvjYRrsOhqznPzbkUtcbVXOAg$