RE: concat multiple waveform records [SEC=OFFICIAL]

[Jignesh Patel via Tech-talk <tech-talk at aps.anl.gov>]

Hi Andrew,

 

I have tested concat record and it is working fine for our requirement to concat data buffer captured from custom Modbus interface in chunks of 125 byte.

I have tried aCalcout record also which is also working fine to concat two arrays but in our case we need to concat multiple arrays due to size of data buffer.

 

Best regards,

Jignesh

 

 

From: Tech-talk [mailto:tech-talk-bounces at aps.anl.gov] On Behalf Of Jignesh Patel via Tech-talk
Sent: 21 January 2025 12:58
To: 'STARRITT, Andrew' <andrews at ansto.gov.au>; 'Johnson, Andrew N.' <anj at anl.gov>
Cc: tech-talk at aps.anl.gov
Subject: RE: concat multiple waveform records [SEC=OFFICIAL]

 

Hi Andrew,

 

Thanks for the link, I will explore both options concat and aCalcout.

 

Best regards,

Jignesh

 

From: STARRITT, Andrew [mailto:andrews at ansto.gov.au]
Sent: 21 January 2025 11:43
To: Johnson, Andrew N. <anj at anl.gov>; Jignesh Patel <jjp at ipr.res.in>; tech-talk at aps.anl.gov
Subject: RE: concat multiple waveform records [SEC=OFFICIAL]

 

 

Hi Jignesh,
You could also try the concat record, which is available here:

https://github.com/AustralianSynchrotron/concat-record

Cheers

Andrew Starritt

Australian Synchrotron

OFFICIAL

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Johnson, Andrew N. via Tech-talk
Sent: Saturday, January 18, 2025 6:13 AM
To: Jignesh Patel <jjp at ipr.res.in>; tech-talk at aps.anl.gov
Subject: Re: concat multiple waveform records

 

CAUTION, EXTERNAL EMAIL: This message has come from outside of ANSTO. Do not take action, click links or open attachments unless you trust the source of this message and know the content is safe. Report spam and phishing using the Report Message button or if unsure, forward this message to servicedesk at ansto.gov.au as an attachment.

 

Hi Jignesh,

 

I haven’t used it myself, but it looks like the aynApps aCalcout record type should be able to do this, using the CAT operator, although it might not be the most efficient way. The other approach I would look at would be to write a subroutine for the aSub record type to combine your input array values into an output array — this requires you to be able to write C code.

 

Hope this helps, please reply to tech-talk with any follow-up questions you have.

 

- Andrew

-- 

Complexity comes for free, Simplicity you have to work for.

 

 

On 1/17/25, 2:13 AM, "Tech-talk" <tech-talk-bounces at aps.anl.gov> wrote:

 

Hi,

 

I have requirement to concat multiple waveform records received from Modbus device to single waveform.

 

Please suggest aConcat or joinArray is suitable for this, though I have never used it.

 

Please guide.

 

Thanks and best regards,

Jignesh