FW: EPICS Support for NI-9223

[Mariano Ruiz via Tech-talk <tech-talk at aps.anl.gov>]

 

Where do you plan to install the NI-9223?

A cRIO system?

 

Best regards

 

Dr. Mariano Ruiz

Professor

Technical University of Madrid

Instrumentation and Applied Acoustic Research Group

ETS Ingeniería y Sistemas de Telecomunicación

Crta Valencia Km-7

Madrid 28031

Phone(R&D Lab): 913364696 Ext: 29403

Phone: +34910673287

Fax: +34913367801

Mobile: +34696476580

email: mariano.ruiz at upm.es

http://www.researcherid.com/rid/H-3309-2011

http://orcid.org/0000-0002-1337-0110

 

 

Disclaimer 

This e-mail message may contain confidential information and/or legally privileged and is intended only for the use of the addressed person. Any disclosure, copying, distribution or the taking of any action in reliance on the contents of this e-mail by any other person is strictly prohibited. If you believe that it has been sent to you in error, please reply to the sender that you have received the message in error, then delete this message from your system. Thank you for your cooperation.

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Ralph Lange via Tech-talk
Sent: Tuesday, May 13, 2025 10:45 AM
To: EPICS Tech Talk <tech-talk at aps.anl.gov>
Subject: Re: EPICS Support for NI-9223

 

On Tue, 13 May 2025 at 09:58, Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov> wrote:

 

I noticed on the NI section of EPICS manufacturers page https://epics.anl.gov/modules/manufacturer.php#National%20Instruments there is an EPICS driver for the NI-DAQmx interface which, according to NI website, works with the NI-9223 but the SVN URL ( http://epics.svn.sourceforge.net/viewvc/epics/applications/trunk/DAQmxBase/ ) is not working. Is there another URL to clone the driver? Will this driver work with the NI-9223? Are there other alternatives?

 

FWIW, the modules database has moved to https://epics-controls.org/resources-and-support/modules/ a few years ago.

 

Note that DAQmx and DAQmx Base are two different NI software products. DAQmx Base development was frozen by NI in 2019 (last release: 2015).

 

ITER has plain EPICS support and an NDSv3 device driver for the IRIO library (by the I2A2 institute of UPM - University of Madrid) on top of the NI DAQmx open source driver (yet another NI driver). [1]

The first official release of the IRIO-based stack was also announced on Tech-Talk [2] and later reported in the EPICS Collaboration Meeting in June 2019. [3]

 

NDSv3 is the C++ framework for data acquisition that ITER proposes for its diagnostics use cases. It was presented in more detail at the ICALEPCS 2021. [4]

We're currently in the middle of the procedure to make the ITER developments for NDSv3 public. Once we have the authorization, things will appear on GitHub.

 

Cheers,
~Ralph

 

[1] https://www.upm.es/recursosidi/en/offers-resources/technological-solutions/irio-intelligent-instrumentation-for-adaptative-integration/

[2] https://epics.anl.gov/tech-talk/2017/msg00083.php

[3] https://indico.global/event/7046/contributions/66556/

[4] https://inspirehep.net/literature/2076620